Interesting Mustang Build

Shane361 · 08-21-2011, 09:36 PM

03SVTCOBRA · 08-21-2011, 11:37 PM

little bit of this, little bit of that, and poof.... you have a pile of junk.

JK it is different and pretty neat, but not my style.

bwelch · 08-21-2011, 11:42 PM

The person that ordered that wheel offset needs to be fired.

JeremyAlan · 08-21-2011, 11:45 PM

Interesting... I like it but i would have done it different. Props to being different.

98Camarod · 08-22-2011, 05:06 AM

the door panels are

The rest of the car looks pretty good, just needs to be lowered

98Camarod · 08-22-2011, 05:17 AM

Quote:

Originally Posted by bwelch

The person that ordered that wheel offset needs to be fired.

It looks like if it were lowered it would be flush with the top of the fender. I think it looks odd because the fenders take a huge angle.

///Mcompact · 08-22-2011, 06:17 AM

Pretty cool.

chrisheltra · 08-22-2011, 06:25 AM

Why do all that work and then put that motor in there?

1iron · 08-22-2011, 07:21 AM

Is it a 4X4?

jmd · 08-22-2011, 07:24 AM

i thought it looked good. i would have put another engine in it.

PapaBear · 08-22-2011, 07:24 AM

Why would they stage the car like that with the wipers in the "up" position?

Lame.

CPTNSLOW · 08-22-2011, 07:34 AM

Did they drop that body on a newer chassis and drivetrain? That would explain a lot of the

Shane361 · 08-22-2011, 07:44 AM

Quote:

Originally Posted by CPTNSLOW

Did they drop that body on a newer chassis and drivetrain? That would explain a lot of the

It seems so which is cool in the aspect of old school looks with new school technology. I would have gone several routes differently though. The rims are not Saleen, hell the car is not Saleen. The stance could be better, the engine is three valve with a 4psi blower if stock. The hood is hideous opening as such and 10 interior would have been better but sure this was in the works before the 10 ever came out. Door panels as mentioned are ugly as hell and stock would look better. Alot of good, some bad. -Shane

WTFWSAT · 08-22-2011, 08:46 AM

Its probably a dynacorn body. Its a cool idea but i didnt know they made 4wd mustangs? And flip the hood back around...other than that its looks aight

WTFWSAT · 11-13-2011, 03:58 PM

http://cgi.ebay.com/ebaymotors/1969-...ht_1233wt_1156

$120k it can be yours!

s14.5gonewide · 11-13-2011, 08:04 PM

i like the idea of the mach1 body styling.. but execution is ehh...

i would almost go with its a body on a diffrent chassis. the front wheels are back in the fender gaps quite a bit further than stock. the body is sitting where it should be but it is very 4x4 ish.

08-21-2011, 09:36 PM	#1
Shane361 Senior Member Join Date: Aug 2007 Location: The Creek Posts: 2,622	Interesting Mustang Build __________________ 2015 Comp Orange Procharged GT Mustang 2018 Grey Ford F150 XLT Sport 4x4

08-21-2011, 11:42 PM	#3
bwelch Senior Member Join Date: Aug 2009 Posts: 3,774	The person that ordered that wheel offset needs to be fired. __________________

08-22-2011, 06:25 AM	#8
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	Why do all that work and then put that motor in there? __________________ Gap A Hoe Racing

08-22-2011, 07:24 AM	#10
jmd Senior Member Join Date: May 2008 Posts: 3,177	i thought it looked good. i would have put another engine in it. __________________ Cadillac man

08-22-2011, 07:34 AM	#12
CPTNSLOW Senior Member Join Date: Feb 2011 Location: Florence Posts: 511	Did they drop that body on a newer chassis and drivetrain? That would explain a lot of the __________________ Something witty and confusing

08-21-2011, 11:37 PM	#2
03SVTCOBRA Senior Member Join Date: Jul 2011 Posts: 2,041	little bit of this, little bit of that, and poof.... you have a pile of junk. JK it is different and pretty neat, but not my style.

08-21-2011, 11:45 PM	#4
JeremyAlan Senior Member Join Date: Aug 2011 Location: Stationed in FL, orig Ladson Posts: 58	Interesting... I like it but i would have done it different. Props to being different.

08-22-2011, 05:06 AM	#5
98Camarod Senior Member Join Date: Mar 2009 Location: Summerville, SC Posts: 1,525	the door panels are The rest of the car looks pretty good, just needs to be lowered

08-22-2011, 06:17 AM	#7
///Mcompact SQUIRREL OVERLORD Join Date: Feb 2007 Location: Nunya bidness Posts: 1,382	Pretty cool.

08-22-2011, 07:21 AM	#9
1iron Senior Member Join Date: May 2007 Posts: 2,014	Is it a 4X4?

08-22-2011, 07:24 AM	#11
PapaBear Senior Member Join Date: Aug 2010 Posts: 2,809	Why would they stage the car like that with the wipers in the "up" position? Lame.

08-22-2011, 08:46 AM	#14
WTFWSAT Senior Member Join Date: Nov 2007 Location: Summerville Posts: 861	Its probably a dynacorn body. Its a cool idea but i didnt know they made 4wd mustangs? And flip the hood back around...other than that its looks aight __________________ Fastest stock computer 5.0 on the planet! Looking for cheeep msd 6al! PM me! 88 Coupe (turtle) 03 Cobra (tortoise)

11-13-2011, 03:58 PM	#15
WTFWSAT Senior Member Join Date: Nov 2007 Location: Summerville Posts: 861	http://cgi.ebay.com/ebaymotors/1969-...ht_1233wt_1156 $120k it can be yours! __________________ Fastest stock computer 5.0 on the planet! Looking for cheeep msd 6al! PM me! 88 Coupe (turtle) 03 Cobra (tortoise)

11-13-2011, 08:04 PM	#16
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	i like the idea of the mach1 body styling.. but execution is ehh... i would almost go with its a body on a diffrent chassis. the front wheels are back in the fender gaps quite a bit further than stock. the body is sitting where it should be but it is very 4x4 ish. __________________ Last edited by s14.5gonewide; 11-13-2011 at 08:06 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode