Insanely clean 646 RWHP Daily Driver 01 Lightning - Page 3

Cobra332 · 10-06-2010, 04:55 PM

Would shoot for monday of next week ...Id just like to have the motor looked over and checked for compression and things of that nature

Cobra332 · 10-06-2010, 05:02 PM

With this list of mods and built does anyone have an idea what it cost to build the motor on this truck? ... Not really up on the 5.4 components.. Have been building alot of 5.0 and 4.6 over the years

Cobra332 · 10-06-2010, 05:05 PM

I would say this truck is more of a low 12's high 11's 1/4mi with the settings currently on it of the 18 psi gears and etc tune...... If im wrong someone please correct me as im no expert on this motor or set up ....

chrisheltra · 10-06-2010, 05:20 PM

Quote:

Originally Posted by Cobra332

With this list of mods and built does anyone have an idea what it cost to build the motor on this truck? ... Not really up on the 5.4 components.. Have been building alot of 5.0 and 4.6 over the years

The motor and the labor to build it and install it alone is worth 10-15k.

Quote:

Originally Posted by Cobra332

I would say this truck is more of a low 12's high 11's 1/4mi with the settings currently on it of the 18 psi gears and etc tune...... If im wrong someone please correct me as im no expert on this motor or set up ....

This is probably a high 10 to low 11 second truck as is assuming the suspension and tires are setup right. This truck is capable with high boost/timing and c16 of running low 10's and possibly even high 9's with weight reduction.

Cobra332 · 10-06-2010, 05:24 PM

good idea to trust a motor of this build with 15k miles on it? think shell be able to be ran hard for awhile?

Audie1 · 10-06-2010, 05:28 PM

Quote:

Originally Posted by what'snext

Was told to post this here

*** PLEASE NOTE I DO NOT WANT TO SELL OR TRADE THIS AS I JUST GOT IT BUT A) IT WON'T FIT IN MY GARAGE AND I CAN'T BARE TO LET IT SIT OUTSIDE and B) I DRIVE IT 60 MILES DAILY AND I'M GETTING KILLED ON GAS lol***

I'm pretty sure I have a deal in place to trade the truck but here goes anyway.

This is probably the most ridiculous daily drivable truck you will come across. Many reputable people including Rick at Amazon can vouch for this truck being legit. I'll keep the description fairly limited and assume that if you are seriously interested you'll inquire about more minute details. The truck has 97k original miles but it shows like a 20k mile truck and EVERYTHING that matters has much less than 20k miles on it. Receipts and dyno sheets available. No expense was spared in the building of this truck. It's taken first place trophies including best lightning at Mustang week. Will consider trades but NO junk. Some details:

Silver 01 F-150 SVT Lightning
Black and grey suede interior

Have someone very interested and has the $$$$$$..............call the # I sent you in a Private PM...........Thanks

chrisheltra · 10-06-2010, 05:30 PM

Quote:

Originally Posted by Cobra332

good idea to trust a motor of this build with 15k miles on it? think shell be able to be ran hard for awhile?

Dont see why not as long as its tuned properly.

DolSVT00 · 10-06-2010, 06:06 PM

Quote:

Originally Posted by cobra332

with this list of mods and built does anyone have an idea what it cost to build the motor on this truck? ... Not really up on the 5.4 components.. Have been building alot of 5.0 and 4.6 over the years

15k+......... For his price of 16,5 you could only get the motor, tranny and blower. You'd have to spend more to buy the body to put it in.

I'd buy it if the motor was junk just for the stuff around it. I could rebuild the motor for 3k.

Quote:

Originally Posted by Cobra332

I would say this truck is more of a low 12's high 11's 1/4mi with the settings currently on it of the 18 psi gears and etc tune...... If im wrong someone please correct me as im no expert on this motor or set up ....

I'd say youre high on drugs, it should run mid/low 11's on pump gas.

Cobra332 · 10-06-2010, 06:23 PM

No not high on drugs .. just not highly educated on this motor set up and truck weight and etc... thats why i asked figured people on here know alot more then i do
thanks for the help

what'snext · 10-06-2010, 08:24 PM

as stated previously the truck will not be available next monday man. I've got plans to take it to ATL on Sat pending a sale prior to that. At this price I'm more or less giving the thing away. I have the receipt for the longblock in front of me....a little over $9200 in the motor alone.

chrisheltra · 10-06-2010, 08:53 PM

Quote:

Originally Posted by what'snext

as stated previously the truck will not be available next monday man. I've got plans to take it to ATL on Sat pending a sale prior to that. At this price I'm more or less giving the thing away. I have the receipt for the longblock in front of me....a little over $9200 in the motor alone.

Doubt anybody will be able to come up with that kind cash by saturday.

what'snext · 10-06-2010, 11:04 PM

Quote:

Originally Posted by chrisheltra

Doubt anybody will be able to come up with that kind cash by saturday.

Got a couple actual possibles

Cobra332 · 10-07-2010, 08:37 PM

Will you take 15 for it on Saturday

04ctd · 10-07-2010, 09:37 PM

if you call Navy Fed, they can usually have a loan in a few hours for a car.

HTTH?

what'snext · 10-07-2010, 09:43 PM

Quote:

Originally Posted by Cobra332

Will you take 15 for it on Saturday

Umm that's a negative sir. Please try to find a truck this built and this clean for less than my price. I'm not trying to sound rude at all but I already have offers higher. I'm not interested in taking less than 16.5. I'm already getting more value than that in the trade I have arranged

MonteC · 10-07-2010, 09:52 PM

Gotta love low ballers.

05Saleen · 10-07-2010, 10:14 PM

Quote:

Originally Posted by MonteC

Gotta love low ballers.

Especially the ones that don't know anything about what they are trying to buy....

DolSVT00 · 10-07-2010, 10:37 PM

Quote:

Originally Posted by what'snext

Umm that's a negative sir. Please try to find a truck this built and this clean for less than my price. I'm not trying to sound rude at all but I already have offers higher. I'm not interested in taking less than 16.5. I'm already getting more value than that in the trade I have arranged

I was gonna say it too...... I think you have it priced very fair, you should have no problem getting whet you asked.

Carlrx7 · 10-08-2010, 12:13 AM

We should goto Mexico.

what'snext · 10-08-2010, 05:47 PM

the guy with the trade is now unable to meet until mid week next week. Therefor I'm extending the sale price until that time. Please don't ask me to take lower. Just mounted 4 new hankooks on the truck today

10-07-2010, 09:37 PM	#54
04ctd Senior Member Join Date: Aug 2009 Location: Ladson SC Posts: 4,388	if you call Navy Fed, they can usually have a loan in a few hours for a car. HTTH? __________________ 1 Timothy 3:16 16 And without controversy great is the mystery of godliness: God was manifested in the flesh, Justified in the Spirit, Seen by angels, Preached among the Gentiles, Believed on in the world, Received up in glory.

10-07-2010, 09:52 PM	#56
MonteC Senior Member Join Date: Oct 2009 Location: Summerville Posts: 4,431	Gotta love low ballers. __________________ Griffin Transmission -Home of the most badassest Monte Carlo- Cell: 843-276-0554 Shop: 843-793-4607 04 RSX 06 Ridgeline 86 Monte Carlo

10-08-2010, 12:13 AM	#59
Carlrx7 Senior Member Join Date: Apr 2010 Location: Ladson,SC Posts: 3,813	We should goto Mexico. __________________ Dark Aladdin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-06-2010, 04:55 PM	#41
Cobra332 Member Join Date: Oct 2010 Posts: 9	Would shoot for monday of next week ...Id just like to have the motor looked over and checked for compression and things of that nature

10-06-2010, 05:02 PM	#42
Cobra332 Member Join Date: Oct 2010 Posts: 9	With this list of mods and built does anyone have an idea what it cost to build the motor on this truck? ... Not really up on the 5.4 components.. Have been building alot of 5.0 and 4.6 over the years

10-06-2010, 05:05 PM	#43
Cobra332 Member Join Date: Oct 2010 Posts: 9	I would say this truck is more of a low 12's high 11's 1/4mi with the settings currently on it of the 18 psi gears and etc tune...... If im wrong someone please correct me as im no expert on this motor or set up ....

10-06-2010, 05:24 PM	#45
Cobra332 Member Join Date: Oct 2010 Posts: 9	good idea to trust a motor of this build with 15k miles on it? think shell be able to be ran hard for awhile?

10-06-2010, 06:23 PM	#49
Cobra332 Member Join Date: Oct 2010 Posts: 9	No not high on drugs .. just not highly educated on this motor set up and truck weight and etc... thats why i asked figured people on here know alot more then i do thanks for the help

10-06-2010, 08:24 PM	#50
what'snext Member Join Date: Oct 2010 Location: Summerville Posts: 28	as stated previously the truck will not be available next monday man. I've got plans to take it to ATL on Sat pending a sale prior to that. At this price I'm more or less giving the thing away. I have the receipt for the longblock in front of me....a little over $9200 in the motor alone.

10-07-2010, 08:37 PM	#53
Cobra332 Member Join Date: Oct 2010 Posts: 9	Will you take 15 for it on Saturday

10-08-2010, 05:47 PM	#60
what'snext Member Join Date: Oct 2010 Location: Summerville Posts: 28	the guy with the trade is now unable to meet until mid week next week. Therefor I'm extending the sale price until that time. Please don't ask me to take lower. Just mounted 4 new hankooks on the truck today