motor pull today...

[Matts94Z28]

It won't do anything as it sits right now... My best time in the car was a 7.8x and my best mph in the car has been 94mph which is questionable at dorchester. The last pass I ran an 8.1x at 88 without spinning one bit and basically leaving off of idle. The car still bumped the limiter on the 2-3 and was shifting @ 6800. I have since had the tune patched up and the shift points lowered. These were all made on street tires.

You would think the car runs 9's with a sheet like that but then again the converter wash flashing really high and trans was on it's way out.

[soccerspike15]

Originally Posted by Matts94Z28

It won't do anything as it sits right now... My best time in the car was a 7.8x and my best mph in the car has been 94mph which is questionable at dorchester. The last pass I ran an 8.1x at 88 without spinning one bit and basically leaving off of idle. The car still bumped the limiter on the 2-3 and was shifting @ 6800. I have since had the tune patched up and the shift points lowered. These were all made on street tires.

You would think the car runs 9's with a sheet like that but then again the converter wash flashing really high and trans was on it's way out.

sorry if i said anything inappropriate but it proves hp numbers dont mean anything but again its nice to see what they do put out

[slowgreen99]

Originally Posted by Matts94Z28

You would think the car runs 9's with a sheet like that but then again the converter wash flashing really high and trans was on it's way out.

Whats wrong with running 9's????? Mach Killer and Perm love it.

[soccerspike15]

Originally Posted by slowgreen99

Whats wrong with running 9's????? Mach Killer and Perm love it.

[perm102]

Originally Posted by slowgreen99

Whats wrong with running 9's????? Mach Killer and Perm love it.

[Matts94Z28]

Nothing was wrong with what you said Greg, it was actually pretty acurate for once! LOL

Brandon, are you going to be ready for a rematch when dorchester opens back up?

[slowgreen99]

Originally Posted by Matts94Z28

Nothing was wrong with what you said Greg, it was actually pretty acurate for once! LOL

Brandon, are you going to be ready for a rematch when dorchester opens back up?

My cars is gonna be under the knife soon, but if I still have the stock motor in, and find DR's, then yea. I wanna see what 130K miles, stock 2v, and a 125 shot do.......did I mention STOCK 2v? and OEM clutch! hahah, could get very interesting.

[soccerspike15]

Originally Posted by slowgreen99

My cars is gonna be under the knife soon, but if I still have the stock motor in, and find DR's, then yea. I wanna see what 130K miles, stock 2v, and a 125 shot do.......did I mention STOCK 2v? and OEM clutch! hahah, could get very interesting.

i wanna help the under the knife

[slowgreen99]

Originally Posted by soccerspike15

i wanna help the under the knife

you gotta fix yours tho so I can tear a "780 hp" LS1 car up.

[Matts94Z28]

Originally Posted by slowgreen99

My cars is gonna be under the knife soon, but if I still have the stock motor in, and find DR's, then yea. I wanna see what 130K miles, stock 2v, and a 125 shot do.......did I mention STOCK 2v? and OEM clutch! hahah, could get very interesting.

Yeah I have seen some of the pictures... Should be fun. Maybe you can give me something since you are spraying all that gas!

[slowgreen99]

Originally Posted by Matts94Z28

Yeah I have seen some of the pictures... Should be fun. Maybe you can give me something since you are spraying all that gas!

haha, y? You just said you went 7.8 on street tires from idle....I did that on my biggest pill on drag radials

355-281=74
you have a whole honda motor there to help you out.

[1iron]

Originally Posted by slowgreen99

My cars is gonna be under the knife soon, but if I still have the stock motor in, and find DR's, then yea. I wanna see what 130K miles, stock 2v, and a 125 shot do.......did I mention STOCK 2v? and OEM clutch! hahah, could get very interesting.

You can use my DRs if they fit. My 400rwhp ran 6.67 at 104 mph. The dyno is a good place to tune though.

[slowgreen99]

Originally Posted by 1iron

You can use my DRs if they fit. My 400rwhp ran 6.67 at 104 mph. The dyno is a good place to tune though.

How big are they Paul?

[Matts94Z28]

HA, I never looked at it like that... The run against you was from an Idle... not that it matters. I am sure you will be faster than 7.6's though... we will work something out Maybe I can spray both kits on my car for a total of 63hp. I heard gregs car was going to be the first car in the 3's on stock tires and water pump.

[slowgreen99]

Originally Posted by Matts94Z28

HA, I never looked at it like that... The run against you was from an Idle... not that it matters. I am sure you will be faster than 7.6's though... we will work something out Maybe I can spray both kits on my car for a total of 63hp. I heard gregs car was going to be the first car in the 3's on stock tires and water pump.

hahahahah lmfao! YEEEEAAAAA, 3's....on his way to a fuckin low 8.

[soccerspike15]

Originally Posted by Matts94Z28

HA, I never looked at it like that... The run against you was from an Idle... not that it matters. I am sure you will be faster than 7.6's though... we will work something out Maybe I can spray both kits on my car for a total of 63hp. I heard gregs car was going to be the first car in the 3's on stock tires and water pump.

hahahah stop hating son! im looking at buying those 315/35/17 hooserdaddy drag radials

[Matts94Z28]

I got some 27x11.5s sitting here waiting to go on the car. Should work well with the 3.73's.

[soccerspike15]

Originally Posted by Matts94Z28

I got some 27x11.5s sitting here waiting to go on the car. Should work well with the 3.73's.

our cars are gonna be broke again with broken rearends lol i gotta save up FAST for that 9inch

[clubracergt1]

I thought you dropped the motor out the bottom on those. Looks like that was a bitch.

[1iron]

275/60/15 on 15X10 with 6.5 BS