just a honda - Page 3

Matts94Z28 · 03-09-2011, 10:16 PM

We all know him already... lol

That is the joke.

Audie1 · 03-09-2011, 11:16 PM

Quote:

Originally Posted by Matts94Z28

We all know him already... lol

That is the joke.

Well that would make a difference..................he must of done sumething bad then.

chrisheltra · 03-09-2011, 11:28 PM

Quote:

Originally Posted by Audie1

I'm sure some of you will probably talk shit about me after this is posted, that's fine as I'm a big guy and can handle myself both physically and mentally........................way to welcome the new guy (to whom it applies).

I love you!

nordic97mist · 03-10-2011, 12:30 AM

lol. yeah back in the day i was to say the least, a moron. i know i'll catch shit today for it and always for that matter lol. its not like i could hide behind a computer forever to cover my stupidity. to me the welcome i've gotten here is better than i expected lol. but yeah my days on fastgm to say the least were a total fail. it is what it is. i've learned from it and i feel i've matured alot. but anyhoo back to the honda

kaizenspeed balance shaft delete came in today. i also got a 20$ gift card with it, pretty nice

engine should be coming in tomorrow or friday. just going with a h22a from hmotors. i've got my eye on a m2b4 tranny, oem lsd. as far as engine goes im not gonna mess with the internals, maybe one day. but going with a euro r im, rosko racing fuel rail, prolly some 370cc rc injectors, walbro fuel pump. exhaust and header im not too sure on at this point, we'll see

Audie1 · 03-10-2011, 12:46 AM

Quote:

Originally Posted by nordic97mist

lol. yeah back in the day i was to say the least, a moron. i know i'll catch shit today for it and always for that matter lol. its not like i could hide behind a computer forever to cover my stupidity. to me the welcome i've gotten here is better than i expected lol. but yeah my days on fastgm to say the least were a total fail. it is what it is. i've learned from it and i feel i've matured alot. but anyhoo back to the honda

Well.......that just being said by you kinda pisses me off now, for the simple fact that I now look like a dumbass for having defended the "New Guy". Oh well "You make your bed and have to sleep in it"......and did I ever just make my bed. Guess that I just need be a little more patient before posting in any new guys defense..................sorry CHP...................Oh yea, once again Honda Boy: Welcome to CHP...................Peckerhead.

nordic97mist · 03-10-2011, 12:48 AM

lol. thanks for the welcome

clubracergt1 · 03-10-2011, 07:07 AM

Fogrive me for asking, but I am not familiar with the import scene; but why would you want to remove the balance shaft from your engine? I would think that would create engine vibration and harmonics issues.

Harry · 03-10-2011, 08:20 AM

Quote:

Originally Posted by nordic97mist

lol. thanks for the welcome

You know I am not one for judging people by whatever everybody else says. So until you do something different to prove otherwise, You have atleast shown some restraint to fall into the pissing contest that normally goes on with some of the new guys.

nordic97mist · 03-10-2011, 12:20 PM

Quote:

Originally Posted by clubracergt1

Fogrive me for asking, but I am not familiar with the import scene; but why would you want to remove the balance shaft from your engine? I would think that would create engine vibration and harmonics issues.

less rotating mass and a bump in oil pressure. its not there for balance of the engine but more so a "comfort" thing put in by honda. without it some ppl say the engine vibrates a little more but nothing that noticeable. i have engine mounts/traction bar coming in so that should help some. it seems like a lot of ppl just take their belt off but when they do that oil stops flowing through some ports and you can lose some oil pressure and thats not too good. the kit has plugs to plug those ports and bumps oil pressure back into a safe range

Quote:

Originally Posted by Harry

You know I am not one for judging people by whatever everybody else says. So until you do something different to prove otherwise, You have atleast shown some restraint to fall into the pissing contest that normally goes on with some of the new guys.

i'll tell you from myself i was a total idiot on fastgm lol. complete fail. but since then i've been on a ton of forums so i know the routine by now

ElecTech · 03-10-2011, 03:34 PM

More stretchin' than a gay porno!

Welcome.

nordic97mist · 03-11-2011, 10:39 PM

roflll

its the delivery man!

best sight i've seen in a while

its here

this thing is freshhhh

97-98 h22a thanks to steve from hmotors!

CPTNSLOW · 03-15-2011, 02:18 PM

When will they send the other half?

PapaBear · 03-15-2011, 02:58 PM

Quote:

Originally Posted by cptnslow

when will they send the other half?

lmao!!

nordic97mist · 03-15-2011, 04:57 PM

today actually...

oem m2b4 tranny

LXtasy · 03-15-2011, 05:06 PM

I think he was meaning when is the other 4 cylinders arriving. TO make a total of 8 cylinders. A little joke

nordic97mist · 03-15-2011, 05:12 PM

ah very true lol

CPTNSLOW · 03-15-2011, 05:33 PM

When do you expect to have it up and running or are you waiting for more parts?

nordic97mist · 03-15-2011, 05:40 PM

there's still some things i gotta buy and work on. right now the top thing for me is getting the engine bay painted again. matt said he'd talk to the guy who did his car a while back and let me know. im also waiting on a crank pulley removal tool so i can try to get the bolt off, hopefully while strapped down to the pallet. gonna go ahead replace all the seals on the engine, timing belt, water pump, etc. gotta re-do the brake lines and get an engine harness made up from a company called rywire. ecu. quiet a bit of smaller things. right now im hoping sept/oct to turn the key and get it running. if i can get another raise at work that would help some. at the pay i get i've got to work about 50hrs a wk to keep up the pace

MonteC · 03-15-2011, 05:56 PM

How about this. Lets see who can get their car done first. Then go to the track and see who is faster.

http://www.carolinahorsepower.com/fo...ead.php?t=7756

LXtasy · 03-15-2011, 05:57 PM

Quote:

Originally Posted by MonteC

How about this. Lets see who can get their car done first. Then go to the track and see who is faster.

http://www.carolinahorsepower.com/fo...ead.php?t=7756

Sounds tempting lol

03-09-2011, 10:16 PM	#41
Matts94Z28 Senior Member Join Date: Apr 2008 Location: Summerville Posts: 12,039	We all know him already... lol That is the joke. __________________ Charleston Performance Solutions 4560 Rivers Ave. N. Charleston SC 29405 843-225-1142 https://www.facebook.com/CharlestonPerformanceSolutions www.facebook.com/Selepack

03-10-2011, 12:30 AM	#44
nordic97mist Senior Member Join Date: Mar 2011 Location: Charleston, SC Posts: 306	lol. yeah back in the day i was to say the least, a moron. i know i'll catch shit today for it and always for that matter lol. its not like i could hide behind a computer forever to cover my stupidity. to me the welcome i've gotten here is better than i expected lol. but yeah my days on fastgm to say the least were a total fail. it is what it is. i've learned from it and i feel i've matured alot. but anyhoo back to the honda kaizenspeed balance shaft delete came in today. i also got a 20$ gift card with it, pretty nice engine should be coming in tomorrow or friday. just going with a h22a from hmotors. i've got my eye on a m2b4 tranny, oem lsd. as far as engine goes im not gonna mess with the internals, maybe one day. but going with a euro r im, rosko racing fuel rail, prolly some 370cc rc injectors, walbro fuel pump. exhaust and header im not too sure on at this point, we'll see __________________ Inked For Life!

03-10-2011, 12:48 AM	#46
nordic97mist Senior Member Join Date: Mar 2011 Location: Charleston, SC Posts: 306	lol. thanks for the welcome __________________ Inked For Life!

03-10-2011, 07:07 AM	#47
clubracergt1 Senior Member Join Date: Feb 2007 Location: The Great, white North (Chicagoland) Posts: 2,483	Fogrive me for asking, but I am not familiar with the import scene; but why would you want to remove the balance shaft from your engine? I would think that would create engine vibration and harmonics issues. __________________ This space for rent

03-10-2011, 03:34 PM	#50
ElecTech Senior Member Join Date: May 2009 Location: Charleston, SC Posts: 1,489	More stretchin' than a gay porno! Welcome. __________________ Jaime

03-11-2011, 10:39 PM	#51
nordic97mist Senior Member Join Date: Mar 2011 Location: Charleston, SC Posts: 306	roflll its the delivery man! best sight i've seen in a while its here this thing is freshhhh 97-98 h22a thanks to steve from hmotors! __________________ Inked For Life!

03-15-2011, 02:18 PM	#52
CPTNSLOW Senior Member Join Date: Feb 2011 Location: Florence Posts: 511	When will they send the other half? __________________ Something witty and confusing

03-15-2011, 04:57 PM	#54
nordic97mist Senior Member Join Date: Mar 2011 Location: Charleston, SC Posts: 306	today actually... oem m2b4 tranny __________________ Inked For Life!

03-15-2011, 05:06 PM	#55
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	I think he was meaning when is the other 4 cylinders arriving. TO make a total of 8 cylinders. A little joke __________________

03-15-2011, 05:12 PM	#56
nordic97mist Senior Member Join Date: Mar 2011 Location: Charleston, SC Posts: 306	ah very true lol __________________ Inked For Life!

03-15-2011, 05:33 PM	#57
CPTNSLOW Senior Member Join Date: Feb 2011 Location: Florence Posts: 511	When do you expect to have it up and running or are you waiting for more parts? __________________ Something witty and confusing

03-15-2011, 05:40 PM	#58
nordic97mist Senior Member Join Date: Mar 2011 Location: Charleston, SC Posts: 306	there's still some things i gotta buy and work on. right now the top thing for me is getting the engine bay painted again. matt said he'd talk to the guy who did his car a while back and let me know. im also waiting on a crank pulley removal tool so i can try to get the bolt off, hopefully while strapped down to the pallet. gonna go ahead replace all the seals on the engine, timing belt, water pump, etc. gotta re-do the brake lines and get an engine harness made up from a company called rywire. ecu. quiet a bit of smaller things. right now im hoping sept/oct to turn the key and get it running. if i can get another raise at work that would help some. at the pay i get i've got to work about 50hrs a wk to keep up the pace __________________ Inked For Life!

03-15-2011, 05:56 PM	#59
MonteC Senior Member Join Date: Oct 2009 Location: Summerville Posts: 4,431	How about this. Lets see who can get their car done first. Then go to the track and see who is faster. http://www.carolinahorsepower.com/fo...ead.php?t=7756 __________________ Griffin Transmission -Home of the most badassest Monte Carlo- Cell: 843-276-0554 Shop: 843-793-4607 04 RSX 06 Ridgeline 86 Monte Carlo