Matts94Z28
04-17-2009, 10:26 PM
It will be another turtle killer... coughslowgreen99cough
I will be picking up a 2001 Z28 w/ 38000 miles on it next satuday. This car will serve as my DD since the truck will be gone this july. The car has a seized motor but comes with a spare LQ9 short block with ARP rod bolts, head studs and cometic head gaskets. The car spun a bearing in the LS1 so I should be putting the LQ9 together with the spare parts that come with it and selling the LS1 Here is a list of Mods and a few pictures. I got this for a steal! by the time I am done with it I will have less that 6k in it. Just though I would share....
38,000 original miles on body
LOTS of mods on the car
Enough extra parts to almost build a new motor
2001 m6 z28
mods
-bottom end-
seized 99 ls1 vette motor
-top end-
stock 317 casting heads ported with a 3 angle valve job
dual gold valve springs
rollmaster double roller timing chain
ls6 intake
bbk 80mm throttle body
-other-
centerforce dual friction clutch
aluminum driveshaft
k and n intake
80mm slp maf
msd super conductor wires
pacesetter headers
off road y-pipe
magnaflow catback
innovate wideband
autometer mechanical oil pressure guage
interceptor scan guage
front slotted rotors
hid 8000k headlights
-suspension-
edelbrock strut tower bar
edelbrock adjustable torque arm
adjustable pan hard bar
bmr tubular k-member
bmr sub-frame connectors
kyb adjustable struts
lowering springs 2" drop front 1 3/4" rear
pic of the paint
http://i75.photobucket.com/albums/i286/redneckin8805/DSC00988.jpg
http://i75.photobucket.com/albums/i286/redneckin8805/DSC00991.jpg
http://i75.photobucket.com/albums/i286/redneckin8805/DSC00986.jpg
http://i75.photobucket.com/albums/i286/redneckin8805/100_0081.jpg
under the hood is alot cleaner now.....i actually cleaned and waxed it
http://i75.photobucket.com/albums/i286/redneckin8805/100_0077.jpg
http://i75.photobucket.com/albums/i286/redneckin8805/100_0079.jpg
I will be picking up a 2001 Z28 w/ 38000 miles on it next satuday. This car will serve as my DD since the truck will be gone this july. The car has a seized motor but comes with a spare LQ9 short block with ARP rod bolts, head studs and cometic head gaskets. The car spun a bearing in the LS1 so I should be putting the LQ9 together with the spare parts that come with it and selling the LS1 Here is a list of Mods and a few pictures. I got this for a steal! by the time I am done with it I will have less that 6k in it. Just though I would share....
38,000 original miles on body
LOTS of mods on the car
Enough extra parts to almost build a new motor
2001 m6 z28
mods
-bottom end-
seized 99 ls1 vette motor
-top end-
stock 317 casting heads ported with a 3 angle valve job
dual gold valve springs
rollmaster double roller timing chain
ls6 intake
bbk 80mm throttle body
-other-
centerforce dual friction clutch
aluminum driveshaft
k and n intake
80mm slp maf
msd super conductor wires
pacesetter headers
off road y-pipe
magnaflow catback
innovate wideband
autometer mechanical oil pressure guage
interceptor scan guage
front slotted rotors
hid 8000k headlights
-suspension-
edelbrock strut tower bar
edelbrock adjustable torque arm
adjustable pan hard bar
bmr tubular k-member
bmr sub-frame connectors
kyb adjustable struts
lowering springs 2" drop front 1 3/4" rear
pic of the paint
http://i75.photobucket.com/albums/i286/redneckin8805/DSC00988.jpg
http://i75.photobucket.com/albums/i286/redneckin8805/DSC00991.jpg
http://i75.photobucket.com/albums/i286/redneckin8805/DSC00986.jpg
http://i75.photobucket.com/albums/i286/redneckin8805/100_0081.jpg
under the hood is alot cleaner now.....i actually cleaned and waxed it
http://i75.photobucket.com/albums/i286/redneckin8805/100_0077.jpg
http://i75.photobucket.com/albums/i286/redneckin8805/100_0079.jpg