Log in

View Full Version : 1 wire alternator.


Bradleyrj
05-25-2009, 10:35 PM
Anyone running a 1 wire alt? I know its not the typical 3g setup but I need to re-arrange some things for the turbo pipes and a one wire would help eliminate the plug on my stock alt being so close to the pipe as it is now (almost touching)

Can I run a 1 wire on an EFI car? I have a friend with one on his carbed car and it works great..

slowgreen99
05-25-2009, 10:54 PM
if the alt charges correctly with one wire, then I dont see a problem

Darryl Buckner
05-25-2009, 11:55 PM
easy job. Ma and Harry just got done doing both cars. You will need and alt from a 94 5.0 stang or so, and I have the instruction sheet...:bigthumb:

Bradleyrj
05-26-2009, 06:22 AM
I assume the alt will fit my stock bracket?? or will I need another bracket as well?

Darryl Buckner
05-26-2009, 11:25 AM
It will fit, but it is shown on my instructions where you will have to take a burr wheel and grind out just a little of the aluminum bracket to make it fit, nothing major though.

LXtasy
05-26-2009, 07:09 PM
USE gloves :D

Darryl Buckner
05-27-2009, 08:20 AM
USE gloves :D


I don't know if its I don't like wearing gloves while working on my car or I have flash backs of the prostate check at the doctors office..