1 wire alternator.

Bradleyrj · 05-25-2009, 10:35 PM

Anyone running a 1 wire alt? I know its not the typical 3g setup but I need to re-arrange some things for the turbo pipes and a one wire would help eliminate the plug on my stock alt being so close to the pipe as it is now (almost touching)

Can I run a 1 wire on an EFI car? I have a friend with one on his carbed car and it works great..

slowgreen99 · 05-25-2009, 10:54 PM

if the alt charges correctly with one wire, then I dont see a problem

Darryl Buckner · 05-25-2009, 11:55 PM

easy job. Ma and Harry just got done doing both cars. You will need and alt from a 94 5.0 stang or so, and I have the instruction sheet...

Bradleyrj · 05-26-2009, 06:22 AM

I assume the alt will fit my stock bracket?? or will I need another bracket as well?

Darryl Buckner · 05-26-2009, 11:25 AM

It will fit, but it is shown on my instructions where you will have to take a burr wheel and grind out just a little of the aluminum bracket to make it fit, nothing major though.

LXtasy · 05-26-2009, 07:09 PM

USE gloves

Darryl Buckner · 05-27-2009, 08:20 AM

Quote:

Originally Posted by LXtasy

USE gloves

I don't know if its I don't like wearing gloves while working on my car or I have flash backs of the prostate check at the doctors office..

05-25-2009, 10:35 PM	#1
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	1 wire alternator. Anyone running a 1 wire alt? I know its not the typical 3g setup but I need to re-arrange some things for the turbo pipes and a one wire would help eliminate the plug on my stock alt being so close to the pipe as it is now (almost touching) Can I run a 1 wire on an EFI car? I have a friend with one on his carbed car and it works great.. __________________

05-25-2009, 10:54 PM	#2
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	if the alt charges correctly with one wire, then I dont see a problem __________________ M.R.E. Bad Bob Motorsports

05-25-2009, 11:55 PM	#3
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	easy job. Ma and Harry just got done doing both cars. You will need and alt from a 94 5.0 stang or so, and I have the instruction sheet... __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

05-26-2009, 06:22 AM	#4
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	I assume the alt will fit my stock bracket?? or will I need another bracket as well? __________________

05-26-2009, 11:25 AM	#5
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	It will fit, but it is shown on my instructions where you will have to take a burr wheel and grind out just a little of the aluminum bracket to make it fit, nothing major though. __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

05-26-2009, 07:09 PM	#6
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	USE gloves __________________