stall converter

[BAD BOB]

what would be a good stall for a camero with a ls1 with no mods but a rear gear

[KRYPTONITE]

what would be a good stall for a camero with a ls1 with no mods but a rear gear

18 inch 6700rpm is what matt has in his, it works good

[BAD BOB]

18 inch 6700rpm is what matt has in his, it works good

i should have know you to say something stupid!

[Pesce Nero]

i should have know you to say something stupid!


ask stupid questions you get stupid answers. BTW, Marcus is stupid, it should be a 19" 7200 converter!!

[BAD BOB]

its a true question. Would 3200 be too high

[KRYPTONITE]

i should have know you to say something stupid!

Ask matt, thats the one he has and thats the one you need, and ray the 19" wont work good for gas,

[KRYPTONITE]

its a true question. Would 3200 be too high

3500 to 3700 work good all around

[BAD BOB]

this is a street car, not a drag car like yours

[KRYPTONITE]

this is a street car, not a drag car like yours

o..... ok if thats the case its a street car I would put in a 18 inch 6700 stall will work just fine a little underkill but you will like it

here is a guy i know that does shitty exhaust work but can build you a 18'' street converter around a 6700 stall like you need
here is his number call around 3 o'clock AM he will only pick up on the 7th call so just keep trying
200-3796

[Matts94Z28]

3600 is prefect for a stock car with a gear, but it still gives you room to grow when you do a cam and heads. I have a 3800 from Cameron in mine right now and love it.

[KRYPTONITE]

3600 is prefect for a stock car with a gear, but it still gives you room to grow when you do a cam and heads. I have a 3800 from Cameron in mine right now and love it.

see i told you

[clubracergt1]

Put a stick in it!


Nah, Hell, I don't know jack about convertors. Before anyone else has a chance to say it, call Mr. Cameron.

[Matts94Z28]

Mr. Cameron will charege you around $700 to buy one of his converters, you can save a TON of money if you buy a used TCI for cheap and send it to him. He re-stalled mine, replaced the lock up and made a few other adjustments for $175.

[blkscls1z]

what would be a good stall for a camero with a ls1 with no mods but a rear gear

3600

[jmd]

3200 for a stock or light build. 3600 if you plan to h/c/I mod, run nitrous or FI.

[jay_99z]

3600 is prefect for a stock car with a gear, but it still gives you room to grow when you do a cam and heads. I have a 3800 from Cameron in mine right now and love it.


Agreed. 3600 is great for a car that sees a lot of street use. I loved mine when I had it. It comes down to how much you can tolerate though. I had a 4200 for a couple years and now have a Yank 4400.

Not a huge difference between the 3600 and 4200 in track times but I was looking to get every little bit out of it when I was racing. My vote.....3600-3800.