Hurt the LT1 tonight.

[Matts94Z28]

Well looks like the LT1 is hurt after tonight. I ended up making two passes before it went down. On the last pass the car held on to second gear and wrapped up pretty high, 7k or so, so I had to get out of it way before the traps. Car went 7.92 @82 w/ a 1.81 60ft... went to crank it up and heard a bunch of chatter under the passanger VC. We towed the car home and I pulled the valve cover off expecting to find a broken rocker, stud or valve spring... to my suprise they were fine!

I just cant figure out what the noise could be... it doesnt sound like a lifter and the pushrods are not bent. I am wondering if I could have floated the valves and bent one. Then again I have a TON of PTVC considering I run -5cc flat tops and the pistons are still in the hole some (not zero decked).

Any thoughts on what it could be? Here is a video of the noise, you can hear it best in the last ten seconds of the video. http://www.youtube.com/watch?v=uuLkhZVQacs


Big thanks to Robert, Zac and Brandon for all the help tonight! If it wasn't for those guys I would not have gotte the car home...

Ohhh and thanks to Darryl for getting me lined up! I hooked up well and kinda wish I would have gotten on the converter more... a 1.6 would have been nice to see. :bigthumb:

[Matts94Z28]

Seems like alot of guys think its an exhaust leak... I did find the rear header bolt missing, but I have never heard a gasket leak squeak like that, even with a leak. I went out there and replaced the bolt and pulled the plugs. They look alright, just a little black, but they are old anyhow.

I am going to pull the push rods tomorrow and check them on a slab of granite. I am really hoping a bearing didnt let go, but I will be sure to rule everything else out before I jump to conclusions.

[clubracergt1]

Man, that sucks. I hope it's just an exhaust leak.

[Illusions]

X2

Sounds like time to dump the bottom end on that thing. so go ahead and pull the motor and send the bottom end my way. I'll discard of it properly for you.

I know where there is an Eclipse for sale. It would be a perfect daily driver. Only problem is if you can't handle the power of the purple people eater, I don't know if you would be able to handle the Power of the Eclipse. ;)

[98Camarod]

that's how my exhaust leak started. I drove I kept trying to find what the hell the noise was and it got louder and started to sound like a cricket.

[blkscls1z]

Sorry to hear that Matt. I wanted to come out to the track so bad last night as the DA was around -1000. I spent the day putting a motor in the Integra I recently bought for a DD and had to finish up homework afterwords. It was too late when I got done. :(

[Pesce Nero]

i would do a compression check and pull the pushrods like you said. many people have torn down engines becuase of an exhaust leak

[Matts94Z28]

LOL, it was an exhaust leak. Got it all fixed today. I re-adjusted the lash and everything on the motor and fixed a few odds and ends. Time for some 7.6x's this coming sunday!

That is by far the weirdest sounding exhaust leak I have ever heard... its also crazy how it appeared after a screwy pass. Thanks again to everyone who helped out lastnight!

Neil you didn't miss much... there was hardly anyone out there and it a FREEZING. Plus I only made one pass that would have possibly beat you, even then you probably would have got me on the leave. We will get our race done one of these days. Let me know if you need a hand with that integra.

[98Camarod]

I figured it was an exhaust leak from the video. That's exactly how mine started out.

I'm hoping to make it out to the track this weekend, but right now I'm in VA

[bwelch]

Sorry to hear that Matt. I wanted to come out to the track so bad last night as the DA was around -1000. I spent the day putting a motor in the Integra I recently bought for a Grudge Car and had to finish up homework afterwords. It was too late when I got done. :(

fixed

[blkscls1z]

Good to hear it was just an exhaust leak and you got it fixed! Thanks for the offer. I finished up the Integra yesterday and drove it to work today. Gonna save a lot of gas money compared to the TBSS. Come on up to Darlington this Sat and see what the LT1 does in the 1/4.

[MonteC]

Got my integra fixed sunday too! Loud though, i need the exhaust welded back up.

[Matts94Z28]

race car.

I will see what I have going on this weekend, maybe I can come up to Darlington.

[blkscls1z]

fixed

Sorry to hear that Matt. I wanted to come out to the track so bad last night as the DA was around -1000. I spent the day putting a motor in the Integra I recently bought for a Grudge Car and had to finish up homework afterwords. It was too late when I got done. :(


:laugh2:

It has a JDM engine:hail: that's all you need to know GG!!!! lol :gears:

[Matts94Z28]

Oh snap... JDM?! I bet it has a VTEC controller on it too. PAH!

[KRYPTONITE]

If I was you I would tear it apart, 7.90's out of a big LT1 there's has to be something wrong with it.

[Dride76]

Matt i saw you pull in there yesterday i guess i left before i saw the run which sucks.. it was so freaking cold out there i left around 9

[Matts94Z28]

Matt i saw you pull in there yesterday i guess i left before i saw the run which sucks.. it was so freaking cold out there i left around 9

I also left around 9 and I got there right at 6. You must have missed my passes.

[KRYPTONITE]

If i was you i would pull it out and go though it, 7.90's OUT of a BIG LT1,,, somthing has to be wrong, HAHA

[Matts94Z28]

If i was you i would pull it out and go though it, 7.90's OUT of a BIG LT1,,, somthing has to be wrong, HAHA


What the hell are you talking about,,,,,,,,,,,,,,,BIG? You call a 355ci motor with BONE stock heads and a 230/244 duration camshaft big and built? Hell I dont even have a single aftermarket piece of suspension on the car. Oh wait... I do have a built trans... I guess something is wrong.

Where is your car again?

I guess I could tune it back and dial in 8.40's to bracket race. :poke:

[KRYPTONITE]

What the hell are you talking about,,,,,,,,,,,,,,,BIG? You call a 355ci motor with BONE stock heads and a 230/244 duration camshaft big and built? Hell I dont even have a single aftermarket piece of suspension on the car. Oh wait... I do have a built trans... I guess something is wrong.

Where is your car again?

I guess I could tune it back and dial in 8.40's to bracket race. :poke:

HaHa where's my car at 7.90'S I wouldn't be worry about It, maybe dupree is in your class hell hope your will handle 3 stages your gonna need all of them, when the cars done you let me know when you want some of this little 347 ci motor and get gapped, your mouth and that stupid ass car of yours on the top of my list. But more likly you won't show up even if I do call you out, your the best at that, but time will tell,

[BigdaddyDupree]

you say he dialed in at a 8.40 to bracket race. he dialed on at that because thats all it would run!!!!

[Robert Holton]

you say he dialed in at a 8.40 to bracket race. he dialed on at that because thats all it would run!!!!

how you talk shit when you aint never been that fast... i wish you would keep your 2 cents you give everybody else and put it towards that s10 and make it faster so i dont got to hear none of these excuses why you or none of your friends wont run me... im a broke college student yada yada yada... what do you think i am...

[BigdaddyDupree]

someones whos daddy bought and paid for him a racecar. and is illiterate. any more questions?

[blkscls1z]

someones whos daddy bought and paid for him a racecar. and is illiterate. any more questions?

:laugh2:

[Matts94Z28]

:laugh2:

x2

[Matts94Z28]

The damn compressor is letting go now... I guess it's time to rip it out. Then again, that would make it a race car. I guess im not doing too bad considering I have been driving this car 30-40 miles EVERY day for the last 6 months and taking it to the track occasionally.

[Illusions]

Advanced Auto has an answer to the compressor going out. ;) They were the cheapest I found.

[LXtasy]

Marcus, I have an honest question... Is your car done? If so have you raced it yet? If not, why pick on Matt because he mustered a slow 7.90 out of his car? he isn't claiming it to be bad or fast.

Superman motorsports. I will run you. I will give you 2 and the break. Get in where you fit in.I ain't scared. Bet is $1. Lock that shit in. No other stips. You can't handle it or you want to change it. Than stay on the damn trailer.

People arent afraid to run you. Its just that you want to run for money and people know they will lose. End of story.

[ElecTech]

Get in where you fit in.I ain't scared.

That's what she said.

[LXtasy]

That's what she said.

Damn It Jaime. Stop talking to my wife.