Hurt the LT1 tonight.

Matts94Z28 · 12-07-2009, 12:31 AM

Well looks like the LT1 is hurt after tonight. I ended up making two passes before it went down. On the last pass the car held on to second gear and wrapped up pretty high, 7k or so, so I had to get out of it way before the traps. Car went 7.92 @82 w/ a 1.81 60ft... went to crank it up and heard a bunch of chatter under the passanger VC. We towed the car home and I pulled the valve cover off expecting to find a broken rocker, stud or valve spring... to my suprise they were fine!

I just cant figure out what the noise could be... it doesnt sound like a lifter and the pushrods are not bent. I am wondering if I could have floated the valves and bent one. Then again I have a TON of PTVC considering I run -5cc flat tops and the pistons are still in the hole some (not zero decked).

Any thoughts on what it could be? Here is a video of the noise, you can hear it best in the last ten seconds of the video. http://www.youtube.com/watch?v=uuLkhZVQacs

Big thanks to Robert, Zac and Brandon for all the help tonight! If it wasn't for those guys I would not have gotte the car home...

Ohhh and thanks to Darryl for getting me lined up! I hooked up well and kinda wish I would have gotten on the converter more... a 1.6 would have been nice to see.

Matts94Z28 · 12-07-2009, 03:13 AM

Seems like alot of guys think its an exhaust leak... I did find the rear header bolt missing, but I have never heard a gasket leak squeak like that, even with a leak. I went out there and replaced the bolt and pulled the plugs. They look alright, just a little black, but they are old anyhow.

I am going to pull the push rods tomorrow and check them on a slab of granite. I am really hoping a bearing didnt let go, but I will be sure to rule everything else out before I jump to conclusions.

clubracergt1 · 12-07-2009, 07:11 AM

Man, that sucks. I hope it's just an exhaust leak.

Illusions · 12-07-2009, 07:48 AM

X2

Sounds like time to dump the bottom end on that thing. so go ahead and pull the motor and send the bottom end my way. I'll discard of it properly for you.

I know where there is an Eclipse for sale. It would be a perfect daily driver. Only problem is if you can't handle the power of the purple people eater, I don't know if you would be able to handle the Power of the Eclipse.

98Camarod · 12-07-2009, 10:04 AM

that's how my exhaust leak started. I drove I kept trying to find what the hell the noise was and it got louder and started to sound like a cricket.

blkscls1z · 12-07-2009, 10:35 AM

Sorry to hear that Matt. I wanted to come out to the track so bad last night as the DA was around -1000. I spent the day putting a motor in the Integra I recently bought for a DD and had to finish up homework afterwords. It was too late when I got done.

Pesce Nero · 12-07-2009, 10:50 AM

i would do a compression check and pull the pushrods like you said. many people have torn down engines becuase of an exhaust leak

Matts94Z28 · 12-07-2009, 10:57 AM

LOL, it was an exhaust leak. Got it all fixed today. I re-adjusted the lash and everything on the motor and fixed a few odds and ends. Time for some 7.6x's this coming sunday!

That is by far the weirdest sounding exhaust leak I have ever heard... its also crazy how it appeared after a screwy pass. Thanks again to everyone who helped out lastnight!

Neil you didn't miss much... there was hardly anyone out there and it a FREEZING. Plus I only made one pass that would have possibly beat you, even then you probably would have got me on the leave. We will get our race done one of these days. Let me know if you need a hand with that integra.

98Camarod · 12-07-2009, 12:09 PM

I figured it was an exhaust leak from the video. That's exactly how mine started out.

I'm hoping to make it out to the track this weekend, but right now I'm in VA

bwelch · 12-07-2009, 01:46 PM

Quote:

Originally Posted by blkscls1z

Sorry to hear that Matt. I wanted to come out to the track so bad last night as the DA was around -1000. I spent the day putting a motor in the Integra I recently bought for a Grudge Car and had to finish up homework afterwords. It was too late when I got done.

fixed

blkscls1z · 12-07-2009, 01:51 PM

Good to hear it was just an exhaust leak and you got it fixed! Thanks for the offer. I finished up the Integra yesterday and drove it to work today. Gonna save a lot of gas money compared to the TBSS. Come on up to Darlington this Sat and see what the LT1 does in the 1/4.

MonteC · 12-07-2009, 02:33 PM

Got my integra fixed sunday too! Loud though, i need the exhaust welded back up.

Matts94Z28 · 12-07-2009, 02:57 PM

race car.

I will see what I have going on this weekend, maybe I can come up to Darlington.

blkscls1z · 12-07-2009, 03:09 PM

Quote:

Originally Posted by bwelch

fixed

Quote:

Originally Posted by blkscls1z

Sorry to hear that Matt. I wanted to come out to the track so bad last night as the DA was around -1000. I spent the day putting a motor in the Integra I recently bought for a Grudge Car and had to finish up homework afterwords. It was too late when I got done.

It has a JDM engine

that's all you need to know GG!!!! lol

Matts94Z28 · 12-07-2009, 03:13 PM

Oh snap... JDM?! I bet it has a VTEC controller on it too. PAH!

KRYPTONITE · 12-07-2009, 03:15 PM

If I was you I would tear it apart, 7.90's out of a big LT1 there's has to be something wrong with it.

Dride76 · 12-07-2009, 04:16 PM

Matt i saw you pull in there yesterday i guess i left before i saw the run which sucks.. it was so freaking cold out there i left around 9

Matts94Z28 · 12-07-2009, 04:25 PM

Quote:

Originally Posted by Dride76

Matt i saw you pull in there yesterday i guess i left before i saw the run which sucks.. it was so freaking cold out there i left around 9

I also left around 9 and I got there right at 6. You must have missed my passes.

KRYPTONITE · 12-07-2009, 05:23 PM

If i was you i would pull it out and go though it, 7.90's OUT of a BIG LT1,,, somthing has to be wrong, HAHA

Matts94Z28 · 12-08-2009, 02:14 AM

Quote:

Originally Posted by 72 SCAMP

If i was you i would pull it out and go though it, 7.90's OUT of a BIG LT1,,, somthing has to be wrong, HAHA

What the hell are you talking about,,,,,,,,,,,,,,,BIG? You call a 355ci motor with BONE stock heads and a 230/244 duration camshaft big and built? Hell I dont even have a single aftermarket piece of suspension on the car. Oh wait... I do have a built trans... I guess something is wrong.

Where is your car again?

I guess I could tune it back and dial in 8.40's to bracket race.

12-07-2009, 12:31 AM	#1
Matts94Z28 Senior Member Join Date: Apr 2008 Location: Summerville Posts: 12,039	Hurt the LT1 tonight. Well looks like the LT1 is hurt after tonight. I ended up making two passes before it went down. On the last pass the car held on to second gear and wrapped up pretty high, 7k or so, so I had to get out of it way before the traps. Car went 7.92 @82 w/ a 1.81 60ft... went to crank it up and heard a bunch of chatter under the passanger VC. We towed the car home and I pulled the valve cover off expecting to find a broken rocker, stud or valve spring... to my suprise they were fine! I just cant figure out what the noise could be... it doesnt sound like a lifter and the pushrods are not bent. I am wondering if I could have floated the valves and bent one. Then again I have a TON of PTVC considering I run -5cc flat tops and the pistons are still in the hole some (not zero decked). Any thoughts on what it could be? Here is a video of the noise, you can hear it best in the last ten seconds of the video. http://www.youtube.com/watch?v=uuLkhZVQacs Big thanks to Robert, Zac and Brandon for all the help tonight! If it wasn't for those guys I would not have gotte the car home... Ohhh and thanks to Darryl for getting me lined up! I hooked up well and kinda wish I would have gotten on the converter more... a 1.6 would have been nice to see. __________________ Charleston Performance Solutions 4560 Rivers Ave. N. Charleston SC 29405 843-225-1142 https://www.facebook.com/CharlestonPerformanceSolutions www.facebook.com/Selepack

12-07-2009, 03:13 AM	#2
Matts94Z28 Senior Member Join Date: Apr 2008 Location: Summerville Posts: 12,039	Seems like alot of guys think its an exhaust leak... I did find the rear header bolt missing, but I have never heard a gasket leak squeak like that, even with a leak. I went out there and replaced the bolt and pulled the plugs. They look alright, just a little black, but they are old anyhow. I am going to pull the push rods tomorrow and check them on a slab of granite. I am really hoping a bearing didnt let go, but I will be sure to rule everything else out before I jump to conclusions. __________________ Charleston Performance Solutions 4560 Rivers Ave. N. Charleston SC 29405 843-225-1142 https://www.facebook.com/CharlestonPerformanceSolutions www.facebook.com/Selepack

12-07-2009, 07:11 AM	#3
clubracergt1 Senior Member Join Date: Feb 2007 Location: The Great, white North (Chicagoland) Posts: 2,483	Man, that sucks. I hope it's just an exhaust leak. __________________ This space for rent

12-07-2009, 07:48 AM	#4
Illusions Senior Member Join Date: Apr 2008 Location: In the Pits Posts: 2,247	X2 Sounds like time to dump the bottom end on that thing. so go ahead and pull the motor and send the bottom end my way. I'll discard of it properly for you. I know where there is an Eclipse for sale. It would be a perfect daily driver. Only problem is if you can't handle the power of the purple people eater, I don't know if you would be able to handle the Power of the Eclipse. __________________ Illusions Grafix A Pair of "Jackstand" 01 Xtreme Blazers

12-07-2009, 10:35 AM	#6
blkscls1z Senior Member Join Date: Jun 2008 Location: Between Goose Creek & Moncks Corner Posts: 2,310	Sorry to hear that Matt. I wanted to come out to the track so bad last night as the DA was around -1000. I spent the day putting a motor in the Integra I recently bought for a DD and had to finish up homework afterwords. It was too late when I got done. __________________

12-07-2009, 10:04 AM	#5
98Camarod Senior Member Join Date: Mar 2009 Location: Summerville, SC Posts: 1,525	that's how my exhaust leak started. I drove I kept trying to find what the hell the noise was and it got louder and started to sound like a cricket.

12-07-2009, 10:50 AM	#7
Pesce Nero Senior Member Join Date: Jul 2008 Posts: 2,680	i would do a compression check and pull the pushrods like you said. many people have torn down engines becuase of an exhaust leak __________________

12-07-2009, 10:57 AM	#8
Matts94Z28 Senior Member Join Date: Apr 2008 Location: Summerville Posts: 12,039	LOL, it was an exhaust leak. Got it all fixed today. I re-adjusted the lash and everything on the motor and fixed a few odds and ends. Time for some 7.6x's this coming sunday! That is by far the weirdest sounding exhaust leak I have ever heard... its also crazy how it appeared after a screwy pass. Thanks again to everyone who helped out lastnight! Neil you didn't miss much... there was hardly anyone out there and it a FREEZING. Plus I only made one pass that would have possibly beat you, even then you probably would have got me on the leave. We will get our race done one of these days. Let me know if you need a hand with that integra. __________________ Charleston Performance Solutions 4560 Rivers Ave. N. Charleston SC 29405 843-225-1142 https://www.facebook.com/CharlestonPerformanceSolutions www.facebook.com/Selepack

12-07-2009, 12:09 PM	#9
98Camarod Senior Member Join Date: Mar 2009 Location: Summerville, SC Posts: 1,525	I figured it was an exhaust leak from the video. That's exactly how mine started out. I'm hoping to make it out to the track this weekend, but right now I'm in VA

12-07-2009, 01:51 PM	#11
blkscls1z Senior Member Join Date: Jun 2008 Location: Between Goose Creek & Moncks Corner Posts: 2,310	Good to hear it was just an exhaust leak and you got it fixed! Thanks for the offer. I finished up the Integra yesterday and drove it to work today. Gonna save a lot of gas money compared to the TBSS. Come on up to Darlington this Sat and see what the LT1 does in the 1/4. __________________

12-07-2009, 02:33 PM	#12
MonteC Senior Member Join Date: Oct 2009 Location: Summerville Posts: 4,431	Got my integra fixed sunday too! Loud though, i need the exhaust welded back up.

12-07-2009, 02:57 PM	#13
Matts94Z28 Senior Member Join Date: Apr 2008 Location: Summerville Posts: 12,039	race car. I will see what I have going on this weekend, maybe I can come up to Darlington. __________________ Charleston Performance Solutions 4560 Rivers Ave. N. Charleston SC 29405 843-225-1142 https://www.facebook.com/CharlestonPerformanceSolutions www.facebook.com/Selepack

12-07-2009, 03:13 PM	#15
Matts94Z28 Senior Member Join Date: Apr 2008 Location: Summerville Posts: 12,039	Oh snap... JDM?! I bet it has a VTEC controller on it too. PAH! __________________ Charleston Performance Solutions 4560 Rivers Ave. N. Charleston SC 29405 843-225-1142 https://www.facebook.com/CharlestonPerformanceSolutions www.facebook.com/Selepack

12-07-2009, 03:15 PM	#16
KRYPTONITE Senior Member Join Date: Apr 2008 Posts: 3,484	If I was you I would tear it apart, 7.90's out of a big LT1 there's has to be something wrong with it. __________________ *The Hired HIT MAN*

12-07-2009, 04:16 PM	#17
Dride76 Senior Member Join Date: Nov 2009 Posts: 538	Matt i saw you pull in there yesterday i guess i left before i saw the run which sucks.. it was so freaking cold out there i left around 9 __________________ Slowest white third gen in town!

12-07-2009, 05:23 PM	#19
KRYPTONITE Senior Member Join Date: Apr 2008 Posts: 3,484	If i was you i would pull it out and go though it, 7.90's OUT of a BIG LT1,,, somthing has to be wrong, HAHA