Ford 306 needs a piston and new rings

oldskoolstang · 05-30-2013, 01:49 PM

I got this motor on trade, it was supposed to be a good motor.......I cleaned it up and noticed several grooves in the cylinder walls and that the #1 piston was damaged.

It has:
- Wiseco pistons part #5012H3
- Steel I-beam rods Part # VH 111 (5.090 length)
- .010 turned stock 50 oz crankshaft
- main girdle with ARP studs
- high volume oil pump with pick-up
- Fox Body oil pan
- stock explorer roller cam

Also included is a .030 XXX roller block in much better shape than this one.

You will need to buy one piston, and if you choose new rings (none are broken but i don't know how they'll fit in the other block).

Asking: $200 Firm for it all

Nathan
912- 8 five 6-2601

oldskoolstang · 05-30-2013, 01:52 PM

The lifter tray pictured is not included, I need it for my other motor.

oldskoolstang · 05-30-2013, 01:53 PM

Fix it for less than $200 and have a decent bottom end. If I still have it in a couple weeks I'll fix it myself...

I called Summit and it seems that it will be June 10th before they can get me a piston.....

05-30-2013, 01:52 PM	#2
oldskoolstang Senior Member Join Date: Apr 2012 Location: Guyton, GA Posts: 1,412	The lifter tray pictured is not included, I need it for my other motor. __________________ Working on junk....

05-30-2013, 01:53 PM	#3
oldskoolstang Senior Member Join Date: Apr 2012 Location: Guyton, GA Posts: 1,412	Fix it for less than $200 and have a decent bottom end. If I still have it in a couple weeks I'll fix it myself... I called Summit and it seems that it will be June 10th before they can get me a piston..... __________________ Working on junk....

05-30-2013, 01:49 PM	#1
oldskoolstang Senior Member Join Date: Apr 2012 Location: Guyton, GA Posts: 1,412	Ford 306 needs a piston and new rings I got this motor on trade, it was supposed to be a good motor.......I cleaned it up and noticed several grooves in the cylinder walls and that the #1 piston was damaged. It has: - Wiseco pistons part #5012H3 - Steel I-beam rods Part # VH 111 (5.090 length) - .010 turned stock 50 oz crankshaft - main girdle with ARP studs - high volume oil pump with pick-up - Fox Body oil pan - stock explorer roller cam Also included is a .030 XXX roller block in much better shape than this one. You will need to buy one piston, and if you choose new rings (none are broken but i don't know how they'll fit in the other block). Asking: $200 Firm for it all Nathan 912- 8 five 6-2601 __________________ Working on junk.... Last edited by oldskoolstang; 05-30-2013 at 01:51 PM.