To all the naysayer's about not needing a mafia with a 6#

DolSVT00 · 03-04-2007, 11:50 PM

with a 5# pulley here's a datalog

DolSVT00 · 03-05-2007, 12:02 AM

I asume that 1000 would equate to 5v, the predator screen shows 4.9v at its max when played back
the drop's are the shift points
5v is max for stock 90mm maf

Mike · 03-05-2007, 12:10 AM

Interesting.
I wouldn't of thought you needed a Mafia with just a 6, But that goes to show why its good to have a wideband. Anytime you max the MAF, you will see the a/f go lean. You would then know something is up..

...or you could do exactly what you did, and datalog with the predator.

BTW ,,,good catch.

DolSVT00 · 03-05-2007, 12:12 AM

BTW thats at 50deg outside temp,nighttime air

slow94 · 03-05-2007, 08:12 AM

that goes to show that every truck is different. Our silver truck with the 6lb was dyno'd in the 50's and wasn't even close to pegging the meter.

Ka-Chow · 03-05-2007, 08:43 AM

When we hooked it up to my truck last night I had to let off and i wasn't even putting down a hard pull..... too close for comfort.

Lurch · 03-06-2007, 12:29 AM

They are all so Different!!

Ka-Chow · 03-06-2007, 12:36 AM

If you go to the MAFia on rpm out let it says the second click does requie a tune since you are adjusting more than 24%

Mike · 03-06-2007, 12:41 AM

Quote:

Originally Posted by Ka-Chow

If you go to the MAFia on rpm out let it says the second click does requie a tune since you are adjusting more than 24%

When I had the mafia the 2nd click needed a tune.

I tried it without a tune and the A/F was a point too rich.

Lurch · 03-06-2007, 12:48 AM

THE BIG QUESTION???

03-04-2007, 11:50 PM	#1
DolSVT00 Moderator Join Date: Jan 2007 Location: Goose Creek Posts: 3,913	To all the naysayer's about not needing a mafia with a 6# with a 5# pulley here's a datalog __________________

03-05-2007, 12:02 AM	#2
DolSVT00 Moderator Join Date: Jan 2007 Location: Goose Creek Posts: 3,913	I asume that 1000 would equate to 5v, the predator screen shows 4.9v at its max when played back the drop's are the shift points 5v is max for stock 90mm maf __________________

03-05-2007, 12:12 AM	#4
DolSVT00 Moderator Join Date: Jan 2007 Location: Goose Creek Posts: 3,913	BTW thats at 50deg outside temp,nighttime air __________________

03-05-2007, 08:12 AM	#5
slow94 Senior Member Join Date: Jan 2007 Location: Pimlico S.C. Posts: 551	that goes to show that every truck is different. Our silver truck with the 6lb was dyno'd in the 50's and wasn't even close to pegging the meter. __________________ Red 94 lightning mods: paxton NOVI 2K Best e.t.: 8.14 @ 84.5 with a 1.75 60' = SLOW

03-06-2007, 12:29 AM	#7
Lurch Moderator Join Date: Jan 2007 Location: Goose Creek SC Posts: 554	Mafia They are all so Different!!

03-05-2007, 12:10 AM	#3
Mike Senior Member Join Date: Dec 2006 Location: Goose Creek, SC Posts: 5,481	Interesting. I wouldn't of thought you needed a Mafia with just a 6, But that goes to show why its good to have a wideband. Anytime you max the MAF, you will see the a/f go lean. You would then know something is up.. ...or you could do exactly what you did, and datalog with the predator. BTW ,,,good catch.

03-05-2007, 08:43 AM	#6
Ka-Chow Senior Member Join Date: Jan 2007 Location: Summerville Posts: 712	When we hooked it up to my truck last night I had to let off and i wasn't even putting down a hard pull..... too close for comfort.

03-06-2007, 12:36 AM	#8
Ka-Chow Senior Member Join Date: Jan 2007 Location: Summerville Posts: 712	If you go to the MAFia on rpm out let it says the second click does requie a tune since you are adjusting more than 24%

03-06-2007, 12:48 AM	#10
Lurch Moderator Join Date: Jan 2007 Location: Goose Creek SC Posts: 554	Diablo OR SCT THE BIG QUESTION???