Video of first drive on NEW TT setup

Bradleyrj · 08-04-2009, 04:46 PM

Took the car for a quick ride yesterday. First time since September of 07 I have driven the car under its own power.

Here are a few videos.

This is still on a stock computer and no boost. This thing is going to be an absolute monster. It makes my previous big block car seem like a Hot Wheel car. I have the base tune built I just have to get a new laptop before I can load it. Then just fix the exhaust and a few other things and I'll be set.

79bluebird · 08-04-2009, 05:00 PM

you running a muffler off the down pipe?

1iron · 08-04-2009, 05:16 PM

Fun stuff.

05Saleen · 08-04-2009, 05:36 PM

Nice!!! Glad to see you finally got to drive it!

Bradleyrj · 08-04-2009, 11:03 PM

Quote:

Originally Posted by 79bluebird

you running a muffler off the down pipe?

No mufflers. That's both down pipes open. They end right about where a set of standard fox long tube headers would stop.

wade w · 08-05-2009, 12:08 AM

Very nice. Glad to see you got it going.

Pesce Nero · 08-05-2009, 05:17 PM

congrats

Harry · 08-05-2009, 05:40 PM

Cool. Must feel good to finally get a project going.

Audie1 · 08-06-2009, 06:17 AM

Awesome! What is your static compression ratio?

Bradleyrj · 08-06-2009, 09:06 AM

9.0:1 is what its supposed to be I think.

Audie1 · 08-06-2009, 01:11 PM

Quote:

Originally Posted by Bradleyrj

9.0:1 is what its supposed to be I think.

With a good tune and that compression ratio you should be able to safely run around 15 lbs of Boost on 93 octane. Need to keep track of your 02 count and knock retard. I would run a Methenol Injection System (like SMC or Snow) just to be safe. With Meth you can crank up the Boost some more..........It should be a Beast for sure.

Bradleyrj · 08-06-2009, 01:50 PM

I have a wide band to monitor things.. and 15 lbs of boost on this motor will be way more than a stock block can take. I have been looking at an AIS Injection system for a while.. Just no more money right now.

WWhittle · 08-06-2009, 09:04 PM

Congrats man- I am jealous. I know what it's like to have to wait and wait and wait.
I am going to get to hear mine fire up Monday. Finally.
Keeps us posted on your continued progress.

Audie1 · 08-06-2009, 10:33 PM

Quote:

Originally Posted by Bradleyrj

I have a wide band to monitor things.. and 15 lbs of boost on this motor will be way more than a stock block can take. I have been looking at an AIS Injection system for a while.. Just no more money right now.

Oh........thought the bottom end was beefed up.

LXtasy · 08-06-2009, 10:44 PM

Its not really the bottom end to worry about. It is literally THE BLOCK!

Bradleyrj · 08-07-2009, 06:55 AM

Rotating assembly is good to go.. block ...is not.

Audie1 · 08-07-2009, 09:40 AM

Quote:

Originally Posted by LXtasy

Its not really the bottom end to worry about. It is literally THE BLOCK!

I'm not sure what they do on other makes, but high HP GN's use a Girdle to reinforce everything. Many making over 1,000 HP..............But the question is how much $$$ can you afford to put into it? I just put in a short block that was built by a "supposed great engine builder" in the Buick GN community..............see the pic below. This happened at 14 lbs of Boost. Normally I run 25 lbs when spraying methenol. Talk about being pissed off!!! I had only 200 miles on this engine. Appears that this builder did not know how to torque rod bolts??? That is what I get for going for a deal that was too good to pass up..................that is 2K down the drain, and of course there is no warranty. Just folks willing to help out once I tear it apart to find out exactly what went wrong. This happened in June and I'm still too pissed to mess with it.

clubracergt1 · 08-07-2009, 09:43 AM

All a stud girdle is good for on a stock 5.0 block is holding the two halves together when it splits. I think RM1 can vouch for this.

Bradleyrj · 08-21-2009, 07:55 PM

Made some progress today. Cut up and old piece of interior so the texture would match and painted it black with some SEM to match. Already had the guage cage in the dash vent. Also have an AFR gauge that will be on the pillar that hooks up to my wideband.

Bradleyrj · 09-05-2009, 11:10 PM

UPDATE!!! Its TUNED !!! Got a few things buttoned up today and tuned it tonight. Still open headers so I couldnt drive it. Gonna drive it tomorrow. I borrowed a friends GoPro so I can take some in car video.. I cant wait to see boost!!!

08-04-2009, 04:46 PM	#1
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	Video of first drive on NEW TT setup Update 9-5-09 Took the car for a quick ride yesterday. First time since September of 07 I have driven the car under its own power. Here are a few videos. This is still on a stock computer and no boost. This thing is going to be an absolute monster. It makes my previous big block car seem like a Hot Wheel car. I have the base tune built I just have to get a new laptop before I can load it. Then just fix the exhaust and a few other things and I'll be set. __________________ Last edited by Bradleyrj; 09-05-2009 at 11:11 PM.

08-04-2009, 05:00 PM	#2
79bluebird Senior Member Join Date: Aug 2008 Location: summerville,sc Posts: 398	you running a muffler off the down pipe? __________________ 97 s10 w/355 motor swap 79 firebird getting a 468 pontiac stroker with a 88mm turbo 93 suzuki gsxr 600

08-04-2009, 05:36 PM	#4
05Saleen Senior Member Join Date: Dec 2006 Location: Goose Creek, SC Posts: 3,159	Nice!!! Glad to see you finally got to drive it! __________________ 05 Saleen, 91 Mustang LX, 99 Lightning

08-05-2009, 12:08 AM	#6
wade w Senior Member Join Date: Aug 2007 Location: Savannah GA Posts: 1,725	Very nice. Glad to see you got it going. __________________

08-05-2009, 05:17 PM	#7
Pesce Nero Senior Member Join Date: Jul 2008 Posts: 2,680	congrats __________________

08-04-2009, 05:16 PM	#3
1iron Senior Member Join Date: May 2007 Posts: 2,014	Fun stuff.

08-05-2009, 05:40 PM	#8
Harry Senior Member Join Date: May 2008 Location: Summerville Posts: 3,321	Cool. Must feel good to finally get a project going.

08-06-2009, 06:17 AM	#9
Audie1 Senior Member Join Date: Jan 2008 Location: Summerville, SC Posts: 931	Awesome! What is your static compression ratio? __________________ 1987 Buick Grand National

08-06-2009, 09:06 AM	#10
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	9.0:1 is what its supposed to be I think. __________________

08-06-2009, 01:50 PM	#12
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	I have a wide band to monitor things.. and 15 lbs of boost on this motor will be way more than a stock block can take. I have been looking at an AIS Injection system for a while.. Just no more money right now. __________________

08-06-2009, 09:04 PM	#13
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	Congrats man- I am jealous. I know what it's like to have to wait and wait and wait. I am going to get to hear mine fire up Monday. Finally. Keeps us posted on your continued progress.

08-06-2009, 10:44 PM	#15
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Its not really the bottom end to worry about. It is literally THE BLOCK! __________________

08-07-2009, 06:55 AM	#16
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	Rotating assembly is good to go.. block ...is not. __________________

08-07-2009, 09:43 AM	#18
clubracergt1 Senior Member Join Date: Feb 2007 Location: The Great, white North (Chicagoland) Posts: 2,483	All a stud girdle is good for on a stock 5.0 block is holding the two halves together when it splits. I think RM1 can vouch for this. __________________ This space for rent

08-21-2009, 07:55 PM	#19
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	Made some progress today. Cut up and old piece of interior so the texture would match and painted it black with some SEM to match. Already had the guage cage in the dash vent. Also have an AFR gauge that will be on the pillar that hooks up to my wideband. __________________

09-05-2009, 11:10 PM	#20
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	UPDATE!!! Its TUNED !!! Got a few things buttoned up today and tuned it tonight. Still open headers so I couldnt drive it. Gonna drive it tomorrow. I borrowed a friends GoPro so I can take some in car video.. I cant wait to see boost!!! __________________