Ford parts for sale 4.6 and 5.4

LXtasy · 05-20-2007, 06:29 PM

Quote:

85mm C&L Maf with Filter adaptor fits All 99-04 V8 Applications. Mounts to stock air box or aftermarket K&N airchargers or FIPK kits. (New $199) Asking $50

Rear Seat Delete - Has Mach 1 logo in back. Has small hole for Nitrous line to bottle. Bottle was mounted on the base. (New $150) ASKING $75

Mezier Electric water pump fits all 4.6/5.4 mod motors with electric fans includes relay kit and instructions. frees up 7-11hp (New $345) Asking $250

"Pro50 shifter with Steeda and Pro50 handle for TR3650" (New$185) Asking $125

"Fidanza Aluminum flywheel never installed" 8 bolt. fits Cobra and Manual Mach 1 (New $250) Asking $225

"Stock" Mach 1 Front Rotors excellant condition fits 03/04 Cobra and Bullitt Asking $20.00

"Stock" Mach 1 Rear Rotors excellant condition fits 03/04 Cobra and Bullitt Asking $20.00

DOHC Ported and Polished lower intake fits 99-01 Cobra and 03-04 Mach1/Maruader welded.
Welding was $200 (New $550) Asking $400.00

PHP Intake Spacer DOHC ONLY (New $100.00) Asking $50.00

CDC Mach1 Car cover with storage bag Like new (new $153.95) Asking $100

For the Nitrous Users:

"Fuel Pressure Safety Switch w/D-4 Manifold for non-return system" (New $54.95) Asking $35.00

ZEX-Programmable TPS Switch (New $69.99) Asking $35.00

Compucar Nitrous kit - Bottle, Bottle heater, all Nitrous and Fuel lines. Nitrous filter, n2o arming, purge and heater switches in a custom box, relays, fuel n2o and purge solenoids, Fuel line to fuel rail connector. Replaces the shraeder valve on fuel rail and comes with bottle and solenoid brackets. Have a wiring diagram that incorporates all the safety features sold separately. (Local sale gets full bottle) Bottle shipped empty if not picked up locally. Asking $500.00

"NX-11708 NHRA Blow Down Tube Plumbing Kit" (New $18.50) Asking $5.00 (Sale Pending)

X-Cal I loaded with 3 tunes from JMS chip. Not vin locked. Can be re programmed for your vehicle with a mail order program from SCT Dealer. Item comes with data cables to download your new tunes from the programmer over the internet. (New $400.00) Asking $175.00

"K&N Air Charger kit for 03-04 Mach1. Has hole drilled for N2O nozzle, needs plug" (New $245.00) Asking $100.00

I will be adding parts to this list so check back often

Contact Hal at 843-327-9821 for more information on these parts if interested.

Thank you for looking.

All prices are local pick up and payment. I accept Paypal but please add 3% paypal fee to purchase. Shipping costs will be charged for out of area shipping..

I can also get in touch with him if you are not able to. Parts are in damn near new condition

LXtasy · 05-23-2007, 06:15 PM

updated

LXtasy · 05-26-2007, 08:25 AM

list updated again

LXtasy · 05-27-2007, 10:34 AM

Again updated

Jeff · 06-05-2007, 02:51 PM

bottle heater and purge kit asap . Tell your dad to sell it ! I couldn't convince him to when I talked with him .

LXtasy · 06-05-2007, 02:55 PM

buy the whole kit than. lol

SVENSONJR · 06-05-2007, 02:57 PM

I CALL AND LEFT A MESSAGE WITH YOUR DAD BUT NEVER GO TBACK TO ME. ON THE WATER PUMP?

LXtasy · 06-05-2007, 03:25 PM

If it was this weekend than I know why. I will call him and tell him to check his messages.

SVENSONJR · 06-05-2007, 03:37 PM

OH OK ...HOPE EVERYTHING IS OK

Jeff · 06-05-2007, 04:25 PM

I have a plate kit for mine . Remember I'm going with a carb not EFI .

LXtasy · 06-05-2007, 06:02 PM

And? buy it than part the rest out. lol

Jeff · 06-05-2007, 06:16 PM

No . Just the heater and the purge .

05-23-2007, 06:15 PM	#2
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	updated __________________

05-26-2007, 08:25 AM	#3
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	list updated again __________________

05-27-2007, 10:34 AM	#4
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Again updated __________________

06-05-2007, 02:55 PM	#6
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	buy the whole kit than. lol __________________

06-05-2007, 02:57 PM	#7
SVENSONJR Senior Member Join Date: May 2007 Location: MT PLEASANT Posts: 190	I CALL AND LEFT A MESSAGE WITH YOUR DAD BUT NEVER GO TBACK TO ME. ON THE WATER PUMP? __________________ FRANK WHITE SLAMMED LIGHTNING No idea on power, just been tuning on the street.

06-05-2007, 02:51 PM	#5
Jeff Senior Member Join Date: Feb 2007 Posts: 1,015	bottle heater and purge kit asap . Tell your dad to sell it ! I couldn't convince him to when I talked with him .

06-05-2007, 03:25 PM	#8
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	If it was this weekend than I know why. I will call him and tell him to check his messages. __________________

06-05-2007, 03:37 PM	#9
SVENSONJR Senior Member Join Date: May 2007 Location: MT PLEASANT Posts: 190	OH OK ...HOPE EVERYTHING IS OK __________________ FRANK WHITE SLAMMED LIGHTNING No idea on power, just been tuning on the street.

06-05-2007, 04:25 PM	#10
Jeff Senior Member Join Date: Feb 2007 Posts: 1,015	I have a plate kit for mine . Remember I'm going with a carb not EFI .

06-05-2007, 06:02 PM	#11
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	And? buy it than part the rest out. lol __________________

06-05-2007, 06:16 PM	#12
Jeff Senior Member Join Date: Feb 2007 Posts: 1,015	No . Just the heater and the purge .