Mustang 302 parts F/S

rm1 · 09-18-2010, 10:50 PM

..

LXtasy · 09-19-2010, 09:30 AM

That stuff shouldn't be hard to sell at those prices. GL Jeff....

jarhead · 09-22-2010, 11:00 PM

Will that e303 work with all stock shit????

rm1 · 09-23-2010, 12:49 PM

Quote:

Originally Posted by jarhead

Will that e303 work with all stock shit????

Yes

BAD BOB · 09-23-2010, 07:41 PM

will those injectors work for 6lbs of boost?

rm1 · 09-23-2010, 07:46 PM

Quote:

Originally Posted by BAD BOB

will those injectors work for 6lbs of boost?

Yes, if you use an FMU. I wouldn't go over 6lbs w/ 24lb injectors.

jarhead · 09-23-2010, 09:41 PM

So.....Your saying that the E303 will work fine with the stock springs and rockers. Where or What town are you in???

rm1 · 09-23-2010, 09:59 PM

You can run a e303 with stock heads with stock springs and the stock 1.6 rocker. Ive ran a e303 with stock cast iron gt40s,with the stock springs and a 1.7 rocker with no problem. But if you are all stock you are wasting your time with a cam swap anyway.

jarhead · 09-24-2010, 12:00 AM

Heads, springs and rockers all stock as we speak. I do have a set of 1.7 rockers im going to install along with an Hartmen Intake and it has BBK shoties on it now. I was looking at an B303 but I seen this E303 and didnt know if it would need more springs also. Not after the worlds fastest car just a little better sound!!!!!!

rm1 · 09-25-2010, 11:24 PM

Added some more parts to first post.

BAD BOB · 09-26-2010, 07:37 AM

took the old S trim off? going NA now?

rm1 · 10-13-2010, 01:03 PM

Updated

rm1 · 11-14-2010, 01:53 PM

ttt

09-18-2010, 10:50 PM	#1
rm1 Senior Member Join Date: Jun 2008 Posts: 331	Mustang 302 parts F/S .. __________________ Last edited by rm1; 02-01-2011 at 05:16 PM.

09-19-2010, 09:30 AM	#2
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	That stuff shouldn't be hard to sell at those prices. GL Jeff.... __________________

09-23-2010, 07:41 PM	#5
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	will those injectors work for 6lbs of boost? __________________ IM BAD BOB

09-23-2010, 09:59 PM	#8
rm1 Senior Member Join Date: Jun 2008 Posts: 331	You can run a e303 with stock heads with stock springs and the stock 1.6 rocker. Ive ran a e303 with stock cast iron gt40s,with the stock springs and a 1.7 rocker with no problem. But if you are all stock you are wasting your time with a cam swap anyway. __________________

09-25-2010, 11:24 PM	#10
rm1 Senior Member Join Date: Jun 2008 Posts: 331	Added some more parts to first post. __________________

09-22-2010, 11:00 PM	#3
jarhead Junior Member Join Date: Sep 2010 Posts: 3	Will that e303 work with all stock shit????

09-23-2010, 09:41 PM	#7
jarhead Junior Member Join Date: Sep 2010 Posts: 3	So.....Your saying that the E303 will work fine with the stock springs and rockers. Where or What town are you in???

09-24-2010, 12:00 AM	#9
jarhead Junior Member Join Date: Sep 2010 Posts: 3	Heads, springs and rockers all stock as we speak. I do have a set of 1.7 rockers im going to install along with an Hartmen Intake and it has BBK shoties on it now. I was looking at an B303 but I seen this E303 and didnt know if it would need more springs also. Not after the worlds fastest car just a little better sound!!!!!!

09-26-2010, 07:37 AM	#11
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	took the old S trim off? going NA now? __________________ IM BAD BOB

10-13-2010, 01:03 PM	#12
rm1 Senior Member Join Date: Jun 2008 Posts: 331	Updated __________________

11-14-2010, 01:53 PM	#13
rm1 Senior Member Join Date: Jun 2008 Posts: 331	ttt __________________