New Best Last Night

ASkipper · 03-17-2011, 09:12 AM

I got a few new best last night as Darlington.

60' 1.509 new best NA
1/8 7.09@96 new best NA
1/4 11.18@119.8 new best NA

N2O 100hp shot
1/8 6.74@102 new best
1/4 10.59@126 new best

on my only N2O run I had tire shake off the line and only mustered a 1.504 60'. If it would have hooked I maybe would have gone 10.4x. Brad ran my car once and got a good time for only driving the car 3 times at the track.

chrisheltra · 03-17-2011, 09:25 AM

Congrats on the PB! Get it on vid?

Bradleyrj · 03-17-2011, 09:42 AM

Also got a new best. We got Andy's new bests on video and it should be posted soon. I have only driven his car 3 times and my time improves each pass.

ASkipper · 03-17-2011, 09:47 AM

Quote:

Originally Posted by chrisheltra

Congrats on the PB! Get it on vid?

I think we got all my runs on vid. There was a go pro hanging off the side for 2 runs. Lol.

Jonathan · 03-17-2011, 09:48 AM

Quote:

Originally Posted by ASkipper

I got a few new best last night as Darlington.

60' 1.509 new best NA
1/8 7.09@96 new best NA
1/4 11.18@119.8 new best NA

N2O 100hp shot
1/8 6.74@102 new best
1/4 10.59@126 new best

on my only N2O run I had tire shake off the line and only mustered a 1.504 60'. If it would have hooked I maybe would have gone 10.4x. Brad ran my car once and got a good time for only driving the car 3 times at the track.

Congrats! Very nice job.
Since i'm a newb, can you tell me about your setup?

BigdaddyDupree · 03-17-2011, 09:58 AM

PRC stg 2.5 5.3 heads
Torquer v.2 cam
Pacesetter LT headers w/ ORY
Hooker catback w/ cutout
Yank SS 4000 stall
built 4l60e
UMI Tunnel mount Torque arm w/ DS loop
UMI Drag Bar
Moser 12 bolt 3.73 w/spool
Spohn LCA
Spohn Panhard bar
UMI LCA relocation brackets
SLP airlid
K&N filter
FAST 92/92 intake and TB
Siemens 42lb injectors
tuning by me on HP tuners
Convo Pro 15x4 skinnies and 15x9 with 26x10-15 MT slicks
and last but not least
Nitrous Outlet 92mm plate kit currently jetted for 100hp shot.

ASkipper · 03-17-2011, 10:05 AM

Quote:

Originally Posted by BigdaddyDupree

PRC stg 2.5 5.3 heads
Torquer v.2 cam
Pacesetter LT headers w/ ORY
Hooker catback w/ cutout
Yank SS 4000 stall
built 4l60e
UMI Tunnel mount Torque arm w/ DS loop
UMI Drag Bar
Moser 12 bolt 3.73 w/spool
Spohn LCA
Spohn Panhard bar
UMI LCA relocation brackets
SLP airlid
K&N filter
FAST 92/92 intake and TB
Siemens 42lb injectors
tuning by me on HP tuners
Convo Pro 15x4 skinnies and 15x9 with 26x10-15 MT slicks
and last but not least
Nitrous Outlet 92mm plate kit currently jetted for 100hp shot.

Thanks man I was trying to find that post. My memory is not the best anymore takes me a while to list it all. lol

ASkipper · 03-17-2011, 10:30 AM

Here is one of the Go Pro vids this is my best 60' time. I was running a Gen 1 Camaro Drag car and got a little go happy. RED LIGHT. I did get a 1.509 60' NA here.

http://www.youtube.com/watch?v=asOtnvPLzSs

Jonathan · 03-17-2011, 10:36 AM

Quote:

Originally Posted by BigdaddyDupree

PRC stg 2.5 5.3 heads
Torquer v.2 cam
Pacesetter LT headers w/ ORY
Hooker catback w/ cutout
Yank SS 4000 stall
built 4l60e
UMI Tunnel mount Torque arm w/ DS loop
UMI Drag Bar
Moser 12 bolt 3.73 w/spool
Spohn LCA
Spohn Panhard bar
UMI LCA relocation brackets
SLP airlid
K&N filter
FAST 92/92 intake and TB
Siemens 42lb injectors
tuning by me on HP tuners
Convo Pro 15x4 skinnies and 15x9 with 26x10-15 MT slicks
and last but not least
Nitrous Outlet 92mm plate kit currently jetted for 100hp shot.

Thank you, sir!!

Quote:

Originally Posted by ASkipper

Here is one of the Go Pro vids this is my best 60' time. I was running a Gen 1 Camaro Drag car and go a little go happy. RED LIGHT. I did get a 1.509 60' NA here.

http://www.youtube.com/watch?v=asOtnvPLzSs

Very nice! Sounds great

Any idea what the car+driver race weight is?

ASkipper · 03-17-2011, 10:41 AM

Quote:

Originally Posted by Jonathan

Thank you, sir!!

Very nice! Sounds great

Any idea what the car+driver race weight is?

No idea I have never weighed the car. I need to find a track with some scales and see how much it weighs. I know I am a buck eighty.

Jonathan · 03-17-2011, 10:52 AM

Any pilot or flying j truck stops will have certified scales too, fyi. I paid 9 bucks at a truck stop about 6 months ago.... yeah, sucks I had to pay but it was "certified" lol

And I wanted to know bad enough that I didn't care about bothering to look for one that was free.

ASkipper · 03-17-2011, 10:56 AM

Quote:

Originally Posted by Jonathan

Any pilot or flying j truck stops will have certified scales too, fyi. I paid 9 bucks at a truck stop about 6 months ago.... yeah, sucks I had to pay but it was "certified" lol

And I wanted to know bad enough that I didn't care about bothering to look for one that was free.

none of those near me. I got a buddy that has some racecar scales and as soon as he gets them back we are going to corner scale my car and then see what it weighs.

ASkipper · 03-17-2011, 11:21 AM

Brad driving my car

CPTNSLOW · 03-17-2011, 12:06 PM

You actually pass 2 sets of scales on the way to Darlington

ASkipper · 03-17-2011, 12:38 PM

Quote:

Originally Posted by CPTNSLOW

You actually pass 2 sets of scales on the way to Darlington

Car is loaded up and straped down. lol

CPTNSLOW · 03-17-2011, 01:02 PM

5 minutes man.

bwelch · 03-17-2011, 01:18 PM

Thats what your crew is for! unloading and reloading

Bradleyrj · 03-17-2011, 01:53 PM

Quote:

Originally Posted by bwelch

Thats what your crew is for! unloading and reloading

V. P. Loaded the car last night.

Derek · 03-17-2011, 02:13 PM

sweet lovin the gopro!

ASkipper · 03-17-2011, 02:40 PM

I will try and get it weighed soon. I want to corner weigh it anyway.

03-17-2011, 09:12 AM	#1
ASkipper Senior Member Join Date: Feb 2010 Posts: 317	New Best Last Night I got a few new best last night as Darlington. 60' 1.509 new best NA 1/8 7.09@96 new best NA 1/4 11.18@119.8 new best NA N2O 100hp shot 1/8 6.74@102 new best 1/4 10.59@126 new best on my only N2O run I had tire shake off the line and only mustered a 1.504 60'. If it would have hooked I maybe would have gone 10.4x. Brad ran my car once and got a good time for only driving the car 3 times at the track. __________________ SLOW CREW!!! ASkipper-Pres. BradleyRJ-V.P. Joker-Sec. CPTNSLOW-Tres. Taking applications for slow members!!! Lol It's stock just got an exhaust leak. My Daily Driver is: '11 GMC Sierra VMAX-camper/car hauler

03-17-2011, 09:25 AM	#2
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	Congrats on the PB! Get it on vid? __________________ Gap A Hoe Racing

03-17-2011, 09:42 AM	#3
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	Also got a new best. We got Andy's new bests on video and it should be posted soon. I have only driven his car 3 times and my time improves each pass. __________________

03-17-2011, 09:58 AM	#6
BigdaddyDupree Senior Member Join Date: Jul 2008 Location: MACEDONIA Posts: 4,967	PRC stg 2.5 5.3 heads Torquer v.2 cam Pacesetter LT headers w/ ORY Hooker catback w/ cutout Yank SS 4000 stall built 4l60e UMI Tunnel mount Torque arm w/ DS loop UMI Drag Bar Moser 12 bolt 3.73 w/spool Spohn LCA Spohn Panhard bar UMI LCA relocation brackets SLP airlid K&N filter FAST 92/92 intake and TB Siemens 42lb injectors tuning by me on HP tuners Convo Pro 15x4 skinnies and 15x9 with 26x10-15 MT slicks and last but not least Nitrous Outlet 92mm plate kit currently jetted for 100hp shot. __________________ . What you wanna do?

03-17-2011, 10:30 AM	#8
ASkipper Senior Member Join Date: Feb 2010 Posts: 317	Here is one of the Go Pro vids this is my best 60' time. I was running a Gen 1 Camaro Drag car and got a little go happy. RED LIGHT. I did get a 1.509 60' NA here. http://www.youtube.com/watch?v=asOtnvPLzSs __________________ SLOW CREW!!! ASkipper-Pres. BradleyRJ-V.P. Joker-Sec. CPTNSLOW-Tres. Taking applications for slow members!!! Lol It's stock just got an exhaust leak. My Daily Driver is: '11 GMC Sierra VMAX-camper/car hauler Last edited by ASkipper; 03-17-2011 at 10:35 AM.

03-17-2011, 10:52 AM	#11
Jonathan Senior Member Join Date: Dec 2010 Location: Columbia, SC Posts: 273	Any pilot or flying j truck stops will have certified scales too, fyi. I paid 9 bucks at a truck stop about 6 months ago.... yeah, sucks I had to pay but it was "certified" lol And I wanted to know bad enough that I didn't care about bothering to look for one that was free.

03-17-2011, 11:21 AM	#13
ASkipper Senior Member Join Date: Feb 2010 Posts: 317	Brad driving my car __________________ SLOW CREW!!! ASkipper-Pres. BradleyRJ-V.P. Joker-Sec. CPTNSLOW-Tres. Taking applications for slow members!!! Lol It's stock just got an exhaust leak. My Daily Driver is: '11 GMC Sierra VMAX-camper/car hauler

03-17-2011, 12:06 PM	#14
CPTNSLOW Senior Member Join Date: Feb 2011 Location: Florence Posts: 511	You actually pass 2 sets of scales on the way to Darlington __________________ Something witty and confusing

03-17-2011, 01:02 PM	#16
CPTNSLOW Senior Member Join Date: Feb 2011 Location: Florence Posts: 511	5 minutes man. __________________ Something witty and confusing

03-17-2011, 01:18 PM	#17
bwelch Senior Member Join Date: Aug 2009 Posts: 3,774	Thats what your crew is for! unloading and reloading __________________

03-17-2011, 02:13 PM	#19
Derek Senior Member Join Date: Nov 2009 Location: West of the mutha f**cking Ashley Posts: 1,784	sweet lovin the gopro!

03-17-2011, 02:40 PM	#20
ASkipper Senior Member Join Date: Feb 2010 Posts: 317	I will try and get it weighed soon. I want to corner weigh it anyway. __________________ SLOW CREW!!! ASkipper-Pres. BradleyRJ-V.P. Joker-Sec. CPTNSLOW-Tres. Taking applications for slow members!!! Lol It's stock just got an exhaust leak. My Daily Driver is: '11 GMC Sierra VMAX-camper/car hauler