erratic oil psi - hi mile 99 Mustang GT

04ctd · 11-25-2011, 10:29 AM

dad's, the one in my garage pics.

engine has ran great for ever, we bought it ~130k miles, prolly 150 on it now

went to move it out of garage yesterday, and the oil gauge went up to normal, then bounced low, and back high, and low again,

and he shut it off.

any ideas what's up?

do the 4.6 lose oil pumps?
what is the oil pump drove off of?

he has oil changed every ~3k miles, last change was 2k ago,
uses good stuff (he takes his ford filter & oil to a guy)

Harry · 11-25-2011, 10:42 AM

Could be a bad sending unit. Need to verify that with another oil pressure gauge,

04ctd · 11-25-2011, 11:35 AM

can I change the sender out easy
Or will I have to disassemble stuff

I will have him get 1 from the dealer

cmd · 11-25-2011, 11:50 AM

Should be an electrical sender...(sensor)... threads into the block usually easy to change

04ctd · 11-25-2011, 01:37 PM

Need location & wrench size if someone knows

Will ride up there n change it

He has been wanting an 2009. If i aint quick, he will use this excuse to buy one ;-/

03SVTCOBRA · 11-25-2011, 01:46 PM

http://www.stangnet.com/mustang-foru...-location.html

Has your answer and even a picture.

04ctd · 11-25-2011, 08:30 PM

Quote:

Originally Posted by 03SVTCOBRA

http://www.stangnet.com/mustang-foru...-location.html

Has your answer and even a picture.

called VatoZone, it is $7.39, in stock.
thanks, talked to Pops,
told him how much it was,
where it is located, and he is gonna do it himself

most excellent, thanks again.

i am too tired to ride up there, esp after going to get Carl.

gearmesh, inc. · 11-26-2011, 10:41 PM

Oil pump on the mod motors is on the front snout of the crankshaft. Sending units aren't bad to change at all.

MonteC · 11-25-2011, 04:58 PM

Sounds electrical but id put a gauge on it just to verify.

LXtasy · 11-25-2011, 05:20 PM

Oil pressure is for suckers.

perm102 · 11-25-2011, 06:06 PM

I put one on a 2000 and it was really easy. My issue was the pressure was nothing until it just went to normal.

11-25-2011, 10:29 AM	#1
04ctd Senior Member Join Date: Aug 2009 Location: Ladson SC Posts: 4,388	erratic oil psi - hi mile 99 Mustang GT dad's, the one in my garage pics. engine has ran great for ever, we bought it ~130k miles, prolly 150 on it now went to move it out of garage yesterday, and the oil gauge went up to normal, then bounced low, and back high, and low again, and he shut it off. any ideas what's up? do the 4.6 lose oil pumps? what is the oil pump drove off of? he has oil changed every ~3k miles, last change was 2k ago, uses good stuff (he takes his ford filter & oil to a guy) __________________ 1 Timothy 3:16 16 And without controversy great is the mystery of godliness: God was manifested in the flesh, Justified in the Spirit, Seen by angels, Preached among the Gentiles, Believed on in the world, Received up in glory.

11-25-2011, 11:35 AM	#3
04ctd Senior Member Join Date: Aug 2009 Location: Ladson SC Posts: 4,388	can I change the sender out easy Or will I have to disassemble stuff I will have him get 1 from the dealer __________________ 1 Timothy 3:16 16 And without controversy great is the mystery of godliness: God was manifested in the flesh, Justified in the Spirit, Seen by angels, Preached among the Gentiles, Believed on in the world, Received up in glory.

11-25-2011, 11:50 AM	#4
cmd Senior Member Join Date: Jun 2010 Posts: 996	Should be an electrical sender...(sensor)... threads into the block usually easy to change __________________ along for the ride

11-25-2011, 01:37 PM	#5
04ctd Senior Member Join Date: Aug 2009 Location: Ladson SC Posts: 4,388	Need location & wrench size if someone knows Will ride up there n change it He has been wanting an 2009. If i aint quick, he will use this excuse to buy one ;-/ __________________ 1 Timothy 3:16 16 And without controversy great is the mystery of godliness: God was manifested in the flesh, Justified in the Spirit, Seen by angels, Preached among the Gentiles, Believed on in the world, Received up in glory.

11-25-2011, 01:46 PM	#6
03SVTCOBRA Senior Member Join Date: Jul 2011 Posts: 2,041	http://www.stangnet.com/mustang-foru...-location.html Has your answer and even a picture. __________________ [SIGPIC][/SIGPIC]

11-25-2011, 10:42 AM	#2
Harry Senior Member Join Date: May 2008 Location: Summerville Posts: 3,321	Could be a bad sending unit. Need to verify that with another oil pressure gauge,

11-26-2011, 10:41 PM	#8
gearmesh, inc. creepy azz cracka Join Date: Nov 2008 Location: Summerville Posts: 1,587	Oil pump on the mod motors is on the front snout of the crankshaft. Sending units aren't bad to change at all. __________________ "I came into this world kicking, screaming,and covered in someone else's blood, I have no problem leaving the same way!" ÔÇ£If you carry a gun, people will call you paranoid. ThatÔÇÖs ridiculous. If I have a gun, what in the hell do I have to be paranoid about?ÔÇØ -Clint Smith, Thunder Ranch.

11-25-2011, 04:58 PM	#9
MonteC Senior Member Join Date: Oct 2009 Location: Summerville Posts: 4,431	Sounds electrical but id put a gauge on it just to verify. __________________ Griffin Transmission -Home of the most badassest Monte Carlo- Cell: 843-276-0554 Shop: 843-793-4607 04 RSX 06 Ridgeline 86 Monte Carlo

11-25-2011, 05:20 PM	#10
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Oil pressure is for suckers. __________________

11-25-2011, 06:06 PM	#11
perm102 Senior Member Join Date: Feb 2007 Location: Goose Creek Posts: 892	I put one on a 2000 and it was really easy. My issue was the pressure was nothing until it just went to normal. __________________