AOD in a classic stang?

Beigebomber1970 · 09-16-2009, 11:13 AM

I want to put an AOD in my 70 mustang. I know it will physically bolt in,
however is the trans mount going to line up? Is there a TV cable or linkage?
Or a TPS? I already have an idea about the stall for the converter and gearing for the 8 inch....
all of my swapping/restification experience has been on gm products... if it was a th700 or th2004r i'd be elbows deep in atf.....

04ctd · 09-16-2009, 11:54 AM

more than you ever wanted to know:
http://www.tccoa.com/articles/tranny/index.html#

Summit FMC46L - Summit Ford 4.6L Modular Engine with 4R70W Automatic Transmission Combos

Engine and Transmission Combo, 260 HP, Ford, 4.6L SOHC Engine, 4R70W Transmission, 1999-2004, Each

$3,895.50

Each engine is equipped with these Ford components:

* Brand new 4R70W automatic transmission
* Performance Improvement 2V heads
* ECU
* Engine wiring harness
* Custom performance air intake
* MAF sensor
* Starter
* Shifter and cable assemblies
* Power steering pump
* A/C compressor

Warranty

Beigebomber1970 · 09-16-2009, 12:04 PM

yes it is... THANK YOU!

gearmesh, inc. · 09-16-2009, 12:45 PM

If you are looking to put an AOD behind a carbureted mill, Lokar makes the appropriate TV cable linkage that will work with carburetors.

Mike · 09-16-2009, 12:46 PM

Quote:

Originally Posted by gearmesh, inc.

If you are looking to put an AOD behind a carbureted mill, Lokar makes the appropriate TV cable linkage that will work with carburetors.

or a manual valve body.

Mike · 09-16-2009, 12:45 PM

damn that motor tranny combo seems like a hell of a deal.

09-16-2009, 11:13 AM	#1
Beigebomber1970 Member Join Date: Sep 2009 Location: Summerville, S.C. Posts: 9	AOD in a classic stang? I want to put an AOD in my 70 mustang. I know it will physically bolt in, however is the trans mount going to line up? Is there a TV cable or linkage? Or a TPS? I already have an idea about the stall for the converter and gearing for the 8 inch.... all of my swapping/restification experience has been on gm products... if it was a th700 or th2004r i'd be elbows deep in atf.....

09-16-2009, 11:54 AM	#2
04ctd Senior Member Join Date: Aug 2009 Location: Ladson SC Posts: 4,388	more than you ever wanted to know: http://www.tccoa.com/articles/tranny/index.html# Summit FMC46L - Summit Ford 4.6L Modular Engine with 4R70W Automatic Transmission Combos Engine and Transmission Combo, 260 HP, Ford, 4.6L SOHC Engine, 4R70W Transmission, 1999-2004, Each $3,895.50 Each engine is equipped with these Ford components: * Brand new 4R70W automatic transmission * Performance Improvement 2V heads * ECU * Engine wiring harness * Custom performance air intake * MAF sensor * Starter * Shifter and cable assemblies * Power steering pump * A/C compressor Warranty

09-16-2009, 12:04 PM	#3
Beigebomber1970 Member Join Date: Sep 2009 Location: Summerville, S.C. Posts: 9	yes it is... THANK YOU!

09-16-2009, 12:45 PM	#4
gearmesh, inc. creepy azz cracka Join Date: Nov 2008 Location: Summerville Posts: 1,587	If you are looking to put an AOD behind a carbureted mill, Lokar makes the appropriate TV cable linkage that will work with carburetors.

09-16-2009, 12:45 PM	#6
Mike Senior Member Join Date: Dec 2006 Location: Goose Creek, SC Posts: 5,481	damn that motor tranny combo seems like a hell of a deal.