Exhaust work

DolSVT00 · 02-28-2008, 04:52 PM

about every muffler shop around here does Crrrrrrrrrrrrrrrrrrrrrrap work,if its not the crinkled non-mandrel bent pipe, or the fact that they all try to use carbon steel on our stainless steel exhaust, or the cheap carbon rot mufflers, or the carbon steel weld wire they use on our stainless exhaust, its the welds. Frankly most of the muffler butchers around here try to put it togather with bubble gum.

Do it yourself, its cheaper and you know its done right.

Been there, done that. The above route is the one I took.

Chris, you like RC's? Have you crawled under your truck lately? I suggest you do, and take a can of Rust-O-leum with you.(I've been under there, it aint pretty)

02-28-2008, 04:52 PM	#4
DolSVT00 Moderator Join Date: Jan 2007 Location: Goose Creek Posts: 3,913	about every muffler shop around here does Crrrrrrrrrrrrrrrrrrrrrrap work,if its not the crinkled non-mandrel bent pipe, or the fact that they all try to use carbon steel on our stainless steel exhaust, or the cheap carbon rot mufflers, or the carbon steel weld wire they use on our stainless exhaust, its the welds. Frankly most of the muffler butchers around here try to put it togather with bubble gum. Do it yourself, its cheaper and you know its done right. Been there, done that. The above route is the one I took. Chris, you like RC's? Have you crawled under your truck lately? I suggest you do, and take a can of Rust-O-leum with you.(I've been under there, it aint pretty) Last edited by DolSVT00; 02-28-2008 at 04:58 PM.