new parts

BigdaddyDupree · 10-29-2011, 08:46 AM

I have been contemplating going turbo on the truck and i finally took the plunge to get a motor for it that can make decent power. I bought a 370 from neal that was build by Weber racing. It has k1 rods and wiseco pistons -25cc dish. full arp hardware and a custom turbo cam. also got a set of afr 225's from him. This will be the first stout motor i have bought and im pretty stoked. a few of yall know so i figured id just let everyone know.

BAD BOB · 10-29-2011, 09:03 AM

ok

Bradleyrj · 10-29-2011, 09:14 AM

Will be faster than a stock 350.

ForceFed4g63 · 10-29-2011, 09:27 AM

Nice! Add that to the list of cars Brandon won't race...

Matts94Z28 · 10-29-2011, 09:47 AM

Kswiss!!

BigdaddyDupree · 10-29-2011, 10:26 AM

Im not a grudge racer and ill let everyone know as I make progress. Me and brandon are friends id let him outrun ne for fun.

WWhittle · 10-29-2011, 10:33 AM

Congrats! Good luck with it. What's you target date to have it in?

s14.5gonewide · 10-29-2011, 11:19 AM

nice motor and bw turbo.. keep us updated... sooner than later its going to be Carolina turbo power... everyone seems to be going forced induction.

BigdaddyDupree · 10-29-2011, 12:33 PM

Im planning to put it in january or so I still need a torque converter a dif gear, blow off valve nd wastegate along with odds n ends. It will be a blow through in the beginning but if there are issues ill go bs3 n let it eat. Any idea on how much power y'all think this will make? Et?

Bradleyrj · 10-29-2011, 12:37 PM

What size carb? More specifics on the turbo?

BigdaddyDupree · 10-29-2011, 12:44 PM

It will be a holley 750 blowthrough and the turbo is a bw s480 with a 1.32 ar

WWhittle · 10-29-2011, 03:07 PM

Since you have time, try to find a smaller a/r. Something closer to 1.0 is probably better for your setup. The 1.32 will probably be a little slow to spool. It will work, just not why I would consider ideal- IMHO. I'm sure you can find one for cheap.

WWhittle · 10-29-2011, 03:13 PM

And my horsepower guess is 700-750 if everything else is in check. 800-850 if you go efi.

jmd · 10-29-2011, 04:04 PM

sweet .

Bradleyrj · 10-29-2011, 05:11 PM

I am going to stay between 700-800 regardless of fuel system.

red99pony · 10-29-2011, 05:38 PM

tyler are you planning to drive this on the street any?

RobertHolton1 · 10-29-2011, 06:11 PM

Quote:

Originally Posted by BigdaddyDupree

Im planning to put it in january or so I still need a torque converter a dif gear, blow off valve nd wastegate along with odds n ends. It will be a blow through in the beginning but if there are issues ill go bs3 n let it eat. Any idea on how much power y'all think this will make? Et?

4.83 @ 153

chrisheltra · 10-29-2011, 06:19 PM

Can I borrow the turbo?

Whaler · 10-29-2011, 06:26 PM

Nice set up Tyler. Good luck with getting everything right.

ShawnBoyMoody · 10-29-2011, 08:16 PM

Awe sookie keeping the Blow-through dream alive! Good luck Big Daddy.

10-29-2011, 08:46 AM	#1
BigdaddyDupree Senior Member Join Date: Jul 2008 Location: MACEDONIA Posts: 4,967	new parts I have been contemplating going turbo on the truck and i finally took the plunge to get a motor for it that can make decent power. I bought a 370 from neal that was build by Weber racing. It has k1 rods and wiseco pistons -25cc dish. full arp hardware and a custom turbo cam. also got a set of afr 225's from him. This will be the first stout motor i have bought and im pretty stoked. a few of yall know so i figured id just let everyone know. __________________ . What you wanna do?

10-29-2011, 09:03 AM	#2
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	ok __________________ IM BAD BOB

10-29-2011, 09:14 AM	#3
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	Will be faster than a stock 350. __________________

10-29-2011, 09:47 AM	#5
Matts94Z28 Senior Member Join Date: Apr 2008 Location: Summerville Posts: 12,039	Kswiss!! __________________ Charleston Performance Solutions 4560 Rivers Ave. N. Charleston SC 29405 843-225-1142 https://www.facebook.com/CharlestonPerformanceSolutions www.facebook.com/Selepack

10-29-2011, 10:26 AM	#6
BigdaddyDupree Senior Member Join Date: Jul 2008 Location: MACEDONIA Posts: 4,967	Im not a grudge racer and ill let everyone know as I make progress. Me and brandon are friends id let him outrun ne for fun. __________________ . What you wanna do?

10-29-2011, 09:27 AM	#4
ForceFed4g63 Senior Member Join Date: Oct 2009 Location: Aiken Posts: 7,002	Nice! Add that to the list of cars Brandon won't race...

10-29-2011, 10:33 AM	#7
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	Congrats! Good luck with it. What's you target date to have it in?

10-29-2011, 11:19 AM	#8
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	nice motor and bw turbo.. keep us updated... sooner than later its going to be Carolina turbo power... everyone seems to be going forced induction. __________________

10-29-2011, 12:33 PM	#9
BigdaddyDupree Senior Member Join Date: Jul 2008 Location: MACEDONIA Posts: 4,967	Im planning to put it in january or so I still need a torque converter a dif gear, blow off valve nd wastegate along with odds n ends. It will be a blow through in the beginning but if there are issues ill go bs3 n let it eat. Any idea on how much power y'all think this will make? Et? __________________ . What you wanna do?

10-29-2011, 12:37 PM	#10
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	What size carb? More specifics on the turbo? __________________ Last edited by Bradleyrj; 10-29-2011 at 12:41 PM.

10-29-2011, 12:44 PM	#11
BigdaddyDupree Senior Member Join Date: Jul 2008 Location: MACEDONIA Posts: 4,967	It will be a holley 750 blowthrough and the turbo is a bw s480 with a 1.32 ar __________________ . What you wanna do?

10-29-2011, 03:07 PM	#12
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	Since you have time, try to find a smaller a/r. Something closer to 1.0 is probably better for your setup. The 1.32 will probably be a little slow to spool. It will work, just not why I would consider ideal- IMHO. I'm sure you can find one for cheap.

10-29-2011, 03:13 PM	#13
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	And my horsepower guess is 700-750 if everything else is in check. 800-850 if you go efi.

10-29-2011, 04:04 PM	#14
jmd Senior Member Join Date: May 2008 Posts: 3,177	sweet . __________________ Cadillac man

10-29-2011, 05:11 PM	#15
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	I am going to stay between 700-800 regardless of fuel system. __________________

10-29-2011, 05:38 PM	#16
red99pony Senior Member Join Date: Jul 2009 Location: goose creek sc Posts: 818	tyler are you planning to drive this on the street any? __________________ 02 lightning all stock 99 mustang gt Tork Tech terminator kit making a little boost

10-29-2011, 06:19 PM	#18
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	Can I borrow the turbo? __________________ Gap A Hoe Racing

10-29-2011, 06:26 PM	#19
Whaler Moderator Join Date: Dec 2006 Location: West Ashley Posts: 2,498	Nice set up Tyler. Good luck with getting everything right.

10-29-2011, 08:16 PM	#20
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	Awe sookie keeping the Blow-through dream alive! Good luck Big Daddy. __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"