Putting it on the bars! - Page 2

Whaler · 05-12-2008, 04:11 PM

Quote:

Originally Posted by streetsweeper

stock headed LS1. no nitrous on that pass either.

but as of this weekend- i got a button to grab.

Man, that looked slow.

DKB should jump all over that. Does it have "retractable wheelie bars" that pull in after the launch?

slow04 · 05-12-2008, 04:49 PM

Quote:

Originally Posted by streetsweeper

stock headed LS1. no nitrous on that pass either.

but as of this weekend- i got a button to grab.

Man, I hope you have some kinda progressive controller. If you're running a WOT switch that thing will flip over backwards....................................unles s you put on some............wheelie bars

Richard Head · 05-12-2008, 07:01 PM

Nice vid!

wade w · 05-12-2008, 08:03 PM

Damn that looked fast! Dont sopose you would post up an E.T. You can send me a P.M. wink wink.

dkbmxer002 · 05-12-2008, 10:48 PM

Quote:

Originally Posted by streetsweeper

stock headed LS1.

stock style? stock casting? you are telling me you have stock heads on a big cubic inch motor....?

regardless very nice pass!

chrisheltra · 05-12-2008, 10:52 PM

now you want to talk shit to him?

dkbmxer002 · 05-12-2008, 10:55 PM

Quote:

Originally Posted by chrisheltra

now you want to talk shit to him?

how is that talking shit? i am asking a question...

WWhittle · 05-13-2008, 10:45 AM

Stock casting.
And who said anything about big cubic inches?

dkbmxer002 · 05-13-2008, 11:15 AM

Quote:

Originally Posted by streetsweeper

Stock casting.
And who said anything about big cubic inches?

how many cubic inches is it?

WWhittle · 05-13-2008, 11:58 AM

Quote:

Originally Posted by dkbmxer002

how many cubic inches is it?

Enough

slowgreen99 · 05-13-2008, 12:06 PM

281 right here that will tear into all yalls asses. What now?

LXtasy · 05-13-2008, 12:17 PM

around 134 ci here. WHAT! lol

///Mcompact · 05-13-2008, 12:19 PM

Quote:

Originally Posted by LXtasy

around 134 ci here. WHAT! lol

121.9 c.i. What to your what!

BTW...I'm in invisible mode...'cause all of the cool kids are doing it. You don't know where I am..you don't know where I am..

LXtasy · 05-13-2008, 12:27 PM

Shit. But you have turbo. So that null and voids you out.

Whaler · 05-13-2008, 12:44 PM

Quote:

Originally Posted by LXtasy

Shit. But you have turbo. So that null and voids you out.

Excuses make you look weak.

LXtasy · 05-13-2008, 12:51 PM

Well, i just ordered 2 electric turbos and going out there to fill in my cylinder walls with concrete to lower the CI.

///Mcompact · 05-13-2008, 02:52 PM

Quote:

Originally Posted by LXtasy

Shit. But you have turbo. So that null and voids you out.

Not my fault. I just wanted a lancer with an Evo bodykit...but the rest of the bells and whistles (more whistle than bell) had to come with it. I've figured out a way to disconnect the turbo belt, though. so I can run around N/A. I can also convert it to the less parasitic FWD by pulling the Driveline mode lever up (the lever doubles as an E-brake, apparently).

LXtasy · 05-13-2008, 04:12 PM

Quote:

Originally Posted by ///Mcompact

Not my fault. I just wanted a lancer with an Evo bodykit...but the rest of the bells and whistles (more whistle than bell) had to come with it. I've figured out a way to disconnect the turbo belt, though. so I can run around N/A. I can also convert it to the less parasitic FWD by pulling the Driveline mode lever up (the lever doubles as an E-brake, apparently).

Nice. You do have a sharp OZ rally edition I may add. Can you do the Direct exhaust injection yet on your car? I think I am going to do that to mine, I am tired of not burning all my fuel.

91notch · 05-18-2008, 03:45 PM

Now this is putting a car on the bar.

jack a · 05-18-2008, 04:42 PM

Quote:

Originally Posted by 91notch

Now this is putting a car on the bar.

Yes it is.

05-12-2008, 10:52 PM	#26
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	now you want to talk shit to him? __________________ Gap A Hoe Racing

05-13-2008, 12:06 PM	#31
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	281 right here that will tear into all yalls asses. What now? __________________ M.R.E. Bad Bob Motorsports

05-13-2008, 12:17 PM	#32
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	around 134 ci here. WHAT! lol __________________

05-13-2008, 12:27 PM	#34
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Shit. But you have turbo. So that null and voids you out. __________________

05-13-2008, 12:51 PM	#36
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Well, i just ordered 2 electric turbos and going out there to fill in my cylinder walls with concrete to lower the CI. __________________

05-12-2008, 07:01 PM	#23
Richard Head Supporting Member Join Date: Mar 2007 Posts: 788	Nice vid!

05-12-2008, 08:03 PM	#24
wade w Senior Member Join Date: Aug 2007 Location: Savannah GA Posts: 1,725	Damn that looked fast! Dont sopose you would post up an E.T. You can send me a P.M. wink wink.

05-13-2008, 10:45 AM	#28
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	Stock casting. And who said anything about big cubic inches?

05-18-2008, 03:45 PM	#39
91notch Senior Member Join Date: Jan 2007 Location: charleston, sc Posts: 1,131	Now this is putting a car on the bar. __________________ RTCTTFMF!