Well......does anybody have a pulley puller? - Page 2

slow04 · 05-29-2008, 04:40 PM

With the 2.80,you wouldn't have to retune..........

Darryl Buckner · 05-29-2008, 05:12 PM

Quote:

Originally Posted by SlowBlk4dr

Thats REINHART ... down in Jax. Mine hasnt blown up either ... REINHART ...

I know a few years back right after the Marauder came out, there was a bunch of Marauder owners that couldn't stand some Reinhart guy, because he blew up a few different Marauders. I am not sure where he is from, but he did tunes and supercharger mods to them, and blew them up on the dyno before the owners got them back.

Richard Head · 05-29-2008, 05:18 PM

Quote:

Originally Posted by Magoo

Well Jim at Reichard agreed to send me a new pulley if I send back the old one. But he doesn't make the 2.75 anymore, I have to decide whether I want a 2.65 or 2.80 pulley to replace it.

Yea, get the bigger pulley. You don't need to go any faster!

clubracergt1 · 05-29-2008, 05:49 PM

Quote:

Originally Posted by Magoo

Well Jim at Reichard agreed to send me a new pulley if I send back the old one. But he doesn't make the 2.75 anymore, I have to decide whether I want a 2.65 or 2.80 pulley to replace it.

2.65! Mo Powah!

Magoo · 05-29-2008, 05:51 PM

LOL, either way it won't be a big difference. A 2.80 is about 1/4lb less boost and the 2.65 is about 1/3lb more boost. I'll probably get the 2.65 pulley, my A/F was mid 11's I'm sure there's enough room for another 1/3lb of boost.

Richard Head · 05-29-2008, 06:24 PM

Quote:

Originally Posted by Magoo

LOL, either way it won't be a big difference. A 2.80 is about 1/4lb less boost and the 2.65 is about 1/3lb more boost. I'll probably get the 2.65 pulley, my A/F was mid 11's I'm sure there's enough room for another 1/3lb of boost.

DAMN IT!

chrisheltra · 05-29-2008, 06:50 PM

Quote:

Originally Posted by Richard Head

DAMN IT!

LOL

If only we could run those kind of times at the track on an Eaton.

Magoo · 05-29-2008, 07:10 PM

Quote:

Originally Posted by chrisheltra

LOL

If only we could run those kind of times at the track on an Eaton.

Of course you could, just lose some weight.....

chrisheltra · 05-29-2008, 07:12 PM

Quote:

Originally Posted by Magoo

Of course you could, just lose some weight.....

Are you calling me fat?

Magoo · 05-29-2008, 07:16 PM

Quote:

Originally Posted by chrisheltra

Are you calling me fat?

I'm saying that your truck with you in it is a fat bastard. Take it as you will.......

chrisheltra · 05-29-2008, 07:29 PM

Quote:

Originally Posted by Magoo

I'm saying that your truck with you in it is a fat bastard. Take it as you will.......

Skinny bitch

Glad you got everything resolved

Magoo · 05-29-2008, 07:35 PM

Quote:

Originally Posted by chrisheltra

Skinny bitch

You know I'm not too shy of 200lbs....

chrisheltra · 05-29-2008, 07:52 PM

Quote:

Originally Posted by Magoo

You know I'm not too shy of 200lbs....

Ive seen ya before.

As I remember your skinny but built. So when are you going to be able to make another apperance at the track?

I cant wait to see it run with the new mods.

Magoo · 05-29-2008, 08:04 PM

Quote:

Originally Posted by chrisheltra

Ive seen ya before.

As I remember your skinny but built. So when are you going to be able to make another apperance at the track?

I cant wait to see it run with the new mods.

I'd love to be at the track every weekend I just haven't had the time. The club has been pretty slow lately with everybody afraid to spend money so I'm having to spend more and more time there trying to renew members and recruit new members. My only real day off is Sunday and I have games every Sunday so it's tough to make it out to the track. I'd love to go soon though, and get all this rust off! Once I get this pulley swapped and get the car on the dyno to make sure everythings ok I'll make some time to come out there. I'm itching more than anybody to see what the car would run, if I can manage to actually drive it that is.......

Magoo · 07-14-2008, 02:11 PM

Well a little update on this thread. I still don't have a pulley. I shipped the pulley off the week of May 26th. According to USPS it arrived to his shop on the 30th. We spoke and agreed on a 2.65 pulley to replace my 2.75. He explained me they had been hit by lightning and had to have some machines replaced that had been damaged before he could make me a pulley. He said he would be about a week maybe two before I recieved the pulley. A few weeks later I sent him the pictures that I posted on here to show him that I didn't damage the pulley myself, he thought the pulley coming apart might have been my fault. Then after not receiving a pulley or an update I called him on July 9th and 10th to leave messages. I called him again today the 14th and finally got ahold of him. He explained to me that he just got his parts for the machines on Friday and spent the whole weekend getting everything setup. So it will take another week or two before he can get a pulley out to me. I explained that I need a pulley before next week as I need it to drive to Mustang Week. He assured me that he will have it to me by the beginning of next week so I'll have it in time. I'm hoping he'll stand by his word, we'll see what happens next week.

05Saleen · 07-14-2008, 02:20 PM

Glad it is not your "Daily Driver"!!!

slowgreen99 · 07-14-2008, 02:21 PM

good luck magoo. Hopefully my piece will be ready for mustang week too.

Magoo · 07-14-2008, 02:31 PM

Quote:

Originally Posted by 05Saleen

Glad it is not your "Daily Driver"!!!

Me too!! I haven't driven the since the beginning of May and it's driving me crazy! In 7 1/2 months she's seen 450 miles!!!!

05Saleen · 07-14-2008, 02:35 PM

Quote:

Originally Posted by Magoo

Me too!! I haven't driven the since the beginning of May and it's driving me crazy! In 7 1/2 months she's seen 450 miles!!!!

WOW. Don't try to be like me with the mileage thing!

I now have 4500 miles on the Saleen!

05-29-2008, 04:40 PM	#21
slow04 Oink! M-ther F-cker Join Date: Jan 2007 Location: pimlico Posts: 1,126	With the 2.80,you wouldn't have to retune.......... __________________ match my weight and I'll show you this^^^ www.darylsmithdrywall.com

05-29-2008, 05:51 PM	#25
Magoo Senior Member Join Date: Mar 2007 Posts: 925	LOL, either way it won't be a big difference. A 2.80 is about 1/4lb less boost and the 2.65 is about 1/3lb more boost. I'll probably get the 2.65 pulley, my A/F was mid 11's I'm sure there's enough room for another 1/3lb of boost. __________________ Black 2003 Cobra Ported, Upper/Lower Pullied, Sprayed......going corn Slow 2010 BMW 335i JB4-G5iso, DCI, E85 2002 GSX-R600 Full Bolt-ons

07-14-2008, 02:11 PM	#35
Magoo Senior Member Join Date: Mar 2007 Posts: 925	Well a little update on this thread. I still don't have a pulley. I shipped the pulley off the week of May 26th. According to USPS it arrived to his shop on the 30th. We spoke and agreed on a 2.65 pulley to replace my 2.75. He explained me they had been hit by lightning and had to have some machines replaced that had been damaged before he could make me a pulley. He said he would be about a week maybe two before I recieved the pulley. A few weeks later I sent him the pictures that I posted on here to show him that I didn't damage the pulley myself, he thought the pulley coming apart might have been my fault. Then after not receiving a pulley or an update I called him on July 9th and 10th to leave messages. I called him again today the 14th and finally got ahold of him. He explained to me that he just got his parts for the machines on Friday and spent the whole weekend getting everything setup. So it will take another week or two before he can get a pulley out to me. I explained that I need a pulley before next week as I need it to drive to Mustang Week. He assured me that he will have it to me by the beginning of next week so I'll have it in time. I'm hoping he'll stand by his word, we'll see what happens next week. __________________ Black 2003 Cobra Ported, Upper/Lower Pullied, Sprayed......going corn Slow 2010 BMW 335i JB4-G5iso, DCI, E85 2002 GSX-R600 Full Bolt-ons

07-14-2008, 02:20 PM	#36
05Saleen Senior Member Join Date: Dec 2006 Location: Goose Creek, SC Posts: 3,159	Glad it is not your "Daily Driver"!!! __________________ 05 Saleen, 91 Mustang LX, 99 Lightning

07-14-2008, 02:21 PM	#37
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	good luck magoo. Hopefully my piece will be ready for mustang week too. __________________ M.R.E. Bad Bob Motorsports