RoB's Ton of Boost Build.... Day 1

ElecTech · 08-02-2012, 12:41 PM

Quote:

Originally Posted by Foose04

Well then I'll split that bad boy in half and bleed off what I cant use.

I'll likely start on the 2 bar and see if I can keep control of it. If not I'll look more into a computer swap as mine only goes up to 2-Bar.

Its a pretty simple re-pin to step down to the earlier PCM. Only a few pin differences from the green connector to the red.

Pesce Nero · 08-02-2012, 01:14 PM

i think your looking for someone that can do a good job honeing a block and I would be looking for someone that has a torque plate for a LSmota

08-02-2012, 01:14 PM	#2
Pesce Nero Senior Member Join Date: Jul 2008 Posts: 2,680	i think your looking for someone that can do a good job honeing a block and I would be looking for someone that has a torque plate for a LSmota __________________