FS: LS1 short block, heads, ect

Matts94Z28 · 08-15-2012, 02:19 PM

Posting this for a friend over on SLR.

http://streetlethalracing.com/showthread.php?t=10356

Quote:

Originally Posted by Blwn_By_Twins

Spun a rod bearing, was going to rebuild but decided to throw in the towel and say fuck fast cars. Need to get rid of this so I can get the transplant in. Includes the following...

Short block.....pistons, rods, crank
Complete heads minus rockers
Valley cover
LS7 lifters
Lifter trays
Push rods
Valve covers

$500

white99ta · 08-15-2012, 02:32 PM

Do you know what heads he has on it?

ShawnBoyMoody · 08-15-2012, 03:11 PM

Lol. Lol. I'll tell Tayler

1998ta__1991rs · 08-15-2012, 03:27 PM

Quote:

Originally Posted by white99ta

Do you know what heads he has on it?

Short block. No heads

ForceFed4g63 · 08-15-2012, 03:29 PM

It comes with heads, they're just not on the block.

98z-28camaro · 08-15-2012, 05:17 PM

Quote:

Originally Posted by ForceFed4g63

It comes with heads, they're just not on the block.

truf.....heads has 918 springs installed upside down.....(dont ask...previous owner)

98prblms · 08-15-2012, 07:59 PM

Thanks Matt. This is my motor, 806 heads BTW.

MonteC · 08-15-2012, 09:15 PM

Quote:

Originally Posted by 1998ta__1991rs

Short block. No heads

Shut up dingus!

98prblms · 08-21-2012, 10:05 AM

nvrmind

98prblms · 09-13-2012, 01:32 PM

Back up..... edit for new listing.

block, pistons, rods, crank, mains, & bolts, complete heads w/ bolts, minus rockers, LS7 lifters, lifter trays, push rods, valve covers.

Motor has been torn down for inspection and confirmed to have spun 5/6 rod bearings. Cylinder walls look great and shouldn't need any machining.

$500

08-15-2012, 03:11 PM	#3
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	Lol. Lol. I'll tell Tayler __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

08-15-2012, 03:29 PM	#5
ForceFed4g63 Senior Member Join Date: Oct 2009 Location: Aiken Posts: 7,002	It comes with heads, they're just not on the block. __________________ 2000 WS6 2005 CTS-V 2004 Titan QC 4x4

08-15-2012, 07:59 PM	#7
98prblms Member Join Date: Aug 2012 Posts: 9	Thanks Matt. This is my motor, 806 heads BTW. __________________ *I got 98 problems, but Vtec ain't one.*

08-21-2012, 10:05 AM	#9
98prblms Member Join Date: Aug 2012 Posts: 9	nvrmind __________________ *I got 98 problems, but Vtec ain't one.* Last edited by 98prblms; 09-13-2012 at 01:32 PM.

09-13-2012, 01:32 PM	#10
98prblms Member Join Date: Aug 2012 Posts: 9	Back up..... edit for new listing. block, pistons, rods, crank, mains, & bolts, complete heads w/ bolts, minus rockers, LS7 lifters, lifter trays, push rods, valve covers. Motor has been torn down for inspection and confirmed to have spun 5/6 rod bearings. Cylinder walls look great and shouldn't need any machining. $500 __________________ *I got 98 problems, but Vtec ain't one.*

08-15-2012, 02:32 PM	#2
white99ta Senior Member Join Date: Feb 2012 Location: Beaufort/ Goose Creek Posts: 325	Do you know what heads he has on it?