Trans Am is sold - Page 2

Mike · 08-25-2008, 12:59 PM

5.70 On all stages

dkbmxer002 · 08-25-2008, 01:20 PM

never got to see it run, but i am guessing 5.5's with some left in it. and if you went all out 5.3's.

Bradleyrj · 08-25-2008, 02:04 PM

Dang, I wish I woulda gotten a chance to check that thing out. I need to see the new ride when it get's here.

WWhittle · 08-25-2008, 02:09 PM

Quote:

Originally Posted by slowgreen99

ok ok, I didnt wanna tell everyone, but ive seen the slips. On motor, it went 6.89, on spray it went 6.21....just looks fast

lol- you wish

Quote:

Originally Posted by 1998ta__1991rs

i say 6.70's on motor 6.00-6.10 on gas

of all people, i wouldn't have guessed that you would be so far off. 6.70's on motor???? Give me a little more credit than that- you think it never went faster than a 6.70??

WWhittle · 08-25-2008, 02:11 PM

Quote:

Originally Posted by Mike

5.70 On all stages

it only has one stage. And a dry one at that. And no progressive.

Quote:

Originally Posted by Bradleyrj

Dang, I wish I woulda gotten a chance to check that thing out. I need to see the new ride when it get's here.

I would love to see my new ride too. Getting very anxious.

slowgreen99 · 08-25-2008, 02:12 PM

haha, im stickin with my first post on the guessed time...low fifty, high forty

dkbmxer002 · 08-25-2008, 02:15 PM

am i way off?

WWhittle · 08-25-2008, 02:16 PM

Quote:

Originally Posted by slowgreen99

haha, im stickin with my first post on the guessed time...low fifty, high forty

you think an 3500 lb. LS1 with a single dry kit, no progressive on drag radials can go 40's????

WWhittle · 08-25-2008, 02:17 PM

Quote:

Originally Posted by dkbmxer002

am i way off?

5.30's would have never happened- i can tell you that.

slowgreen99 · 08-25-2008, 02:19 PM

Quote:

Originally Posted by streetsweeper

you think an 3500 lb. LS1 with a single dry kit, no progressive on drag radials can go 40's????

LS1, maybe not, Fulton motor, prolly

dkbmxer002 · 08-25-2008, 02:21 PM

what about the 5.5's part?

WWhittle · 08-25-2008, 02:22 PM

Quote:

Originally Posted by slowgreen99

LS1, maybe not, Fulton motor, prolly

Even Fulton isn't that good. With a fogger and progressive, yeah, but not with a single dry kit and no progressive.

WWhittle · 08-25-2008, 02:23 PM

Quote:

Originally Posted by dkbmxer002

what about the 5.5's part?

maybe, maybe not.

some of ya'll give it too much credit, some of ya'll don't give it enough, and then one of ya'll was pretty damn close.

i always wondered what people actually thought that car would run.

Pesce Nero · 08-25-2008, 02:24 PM

Quote:

Originally Posted by streetsweeper

you think an 3500 lb. LS1 with a single dry kit, no progressive on drag radials can go 40's????

and this is how stupid i am, what is a dry kit?

dkbmxer002 · 08-25-2008, 02:24 PM

i never saw it run so i am really just throwing a number out based on what was listed as done to it

WWhittle · 08-25-2008, 02:27 PM

Quote:

Originally Posted by SIXPACKGUT

and this is how stupid i am, what is a dry kit?

simply put- a dry kit sprays nitrous only into the intake and a wet kit sprays both nitrous and fuel.

slowgreen99 · 08-25-2008, 02:28 PM

single digit 1/4s on motor.....im thinkin my numbers have to be in the ball park, maybe an in the park home run?!? hhahaah
Dry is just nitrous injected with injectors compensating for fuel instead of another solenoid

dkbmxer002 · 08-25-2008, 02:28 PM

i also wasn't aware you were only on a dry nozzle. with a couple stages through a plate or direct port i wouldn't see 5.3's being too far fetched... haha

slowgreen99 · 08-25-2008, 02:28 PM

same time post

WWhittle · 08-25-2008, 02:32 PM

The car also has 3:50 gears in it- that leaves a couple tenths on the table at the track, but THE BITCH WORKS IN THE SKREET

08-25-2008, 01:20 PM	#22
dkbmxer002 Moderator Join Date: Jan 2007 Location: orlando/charleston/savannah/D.C. Posts: 2,265	never got to see it run, but i am guessing 5.5's with some left in it. and if you went all out 5.3's. __________________ white 90's ls single cam nitrous hatchback

08-25-2008, 02:04 PM	#23
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	Dang, I wish I woulda gotten a chance to check that thing out. I need to see the new ride when it get's here. __________________

08-25-2008, 02:15 PM	#27
dkbmxer002 Moderator Join Date: Jan 2007 Location: orlando/charleston/savannah/D.C. Posts: 2,265	am i way off? __________________ white 90's ls single cam nitrous hatchback

08-25-2008, 02:21 PM	#31
dkbmxer002 Moderator Join Date: Jan 2007 Location: orlando/charleston/savannah/D.C. Posts: 2,265	what about the 5.5's part? __________________ white 90's ls single cam nitrous hatchback

08-25-2008, 02:24 PM	#35
dkbmxer002 Moderator Join Date: Jan 2007 Location: orlando/charleston/savannah/D.C. Posts: 2,265	i never saw it run so i am really just throwing a number out based on what was listed as done to it __________________ white 90's ls single cam nitrous hatchback

08-25-2008, 12:59 PM	#21
Mike Senior Member Join Date: Dec 2006 Location: Goose Creek, SC Posts: 5,481	5.70 On all stages

08-25-2008, 02:12 PM	#26
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	haha, im stickin with my first post on the guessed time...low fifty, high forty

08-25-2008, 02:28 PM	#37
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	single digit 1/4s on motor.....im thinkin my numbers have to be in the ball park, maybe an in the park home run?!? hhahaah Dry is just nitrous injected with injectors compensating for fuel instead of another solenoid

08-25-2008, 02:32 PM	#40
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	The car also has 3:50 gears in it- that leaves a couple tenths on the table at the track, but THE BITCH WORKS IN THE SKREET