WTB aluminum sheets

BigdaddyDupree · 02-01-2010, 12:15 AM

in need of two aluminum sheets. a 4x8 one and two if ya got em. let me know.

coonrod · 02-01-2010, 09:19 PM

sre you building a firewall and a floor for the truck !

DolSVT00 · 02-01-2010, 10:03 PM

4" by 8"? or 4'x8'? I can probably help you if its smaller pieces but 4 foot by 8 foot your on your own lol

chrisheltra · 02-01-2010, 10:25 PM

Ive seen a few people on here looking for bulk metal. Is it that hard to come by? Ive never tried looking so dont take this as being a smartass.

There is a metal fab shop just infront of my work on trident street that you may be able to hit up. There is another one on bankton circle called master sheet metal that may be able to help.

Oh there is another big one across the street on the same road as bouschlons (sp) but on the opposite corner.

WWhittle · 02-01-2010, 10:36 PM

Can't you buy sheets of aluminum at Lowe's?

chrisheltra · 02-01-2010, 10:41 PM

Quote:

Originally Posted by Wes Whittle

Can't you buy sheets of aluminum at Lowe's?

In SC you can only by sheets of diamond plate.

DolSVT00 · 02-01-2010, 10:44 PM

Quote:

Originally Posted by chrisheltra

Ive seen a few people on here looking for bulk metal. Is it that hard to come by? Ive never tried looking so dont take this as being a smartass.

There is a metal fab shop just infront of my work on trident street that you may be able to hit up. There is another one on bankton circle called master sheet metal that may be able to help.

Oh there is another big one across the street on the same road as bouschlons (sp) but on the opposite corner.

Its the price, and most of them scrap more than we would consume, but they get big money for selling that stuff. The one by boushillon is one of our parts suppliers, I forget the name. Ive been there though.

chrisheltra · 02-01-2010, 10:55 PM

Laurentide, Master sheet metal and american pipe inc might not find sheet metal there. Theres also a place over near dorchester called leatherwood.

///Mcompact · 02-01-2010, 11:01 PM

Quote:

Originally Posted by chrisheltra

In SC you can only by sheets of diamond plate.

You can buy sheets of different steel, tin, aluminum at Lowes, but the biggest sheet I've seen is like 3'X4'.

DolSVT00 · 02-01-2010, 11:05 PM

Quote:

Originally Posted by chrisheltra

Laurentide, Master sheet metal and american pipe inc might not find sheet metal there. Theres also a place over near dorchester called leatherwood.

Yup thats it.... Master sheet metal was a ductwork shop I thaught? American Screwpipe and handrail lol good luck with that Sam aint coming off nothin for free. leatherwood was? or is an electrical contractor I think the only steel they deal with is galvanize cable tray lol.

Not sure about lowes, but charleston steel would probably be where i'd start and frishcorn for the round stuff.

BAD BOB · 02-01-2010, 11:06 PM

Fields ornamental and iron on cross county or may try atlantic coast steel off ladson

05Saleen · 02-02-2010, 12:26 AM

Quote:

Originally Posted by BAD BOB

Fields ornamental and iron on cross county or may try atlantic coast steel off ladson

That would be a good resource....If you know anyone at Jw Aluminum....You could probably buy it at a scrap rate.

MonteC · 02-02-2010, 07:22 AM

Quote:

Originally Posted by BAD BOB

Fields ornamental

I wouldnt go back there if it was the only place in the country. There is a reason his name is Dicky Fields. Ill give you a hint, hes a DICK!

BAD BOB · 02-02-2010, 09:05 AM

that is tru. i have delt with him for years and now it seems that he charges me more than give me a deal but there aint alot of places around that can get the material he can, and thats why i said to check atlantic coast

Chillerman · 02-07-2010, 04:10 PM

A & R Sheetmetal on Main Rd. Johns Island may be able to help. They can make anything and probably get anything.

LXtasy · 02-07-2010, 04:37 PM

Quote:

Originally Posted by Chillerman

A & R Sheetmetal on Main Rd. Johns Island may be able to help. They can make anything and probably get anything.

They do good work. But I do not think they will sell the sheets outright. But will fab up what you need though.

02-01-2010, 12:15 AM	#1
BigdaddyDupree Senior Member Join Date: Jul 2008 Location: MACEDONIA Posts: 4,967	WTB aluminum sheets in need of two aluminum sheets. a 4x8 one and two if ya got em. let me know. __________________ . What you wanna do?

02-01-2010, 09:19 PM	#2
coonrod Senior Member Join Date: Feb 2008 Location: north chuck Posts: 136	sre you building a firewall and a floor for the truck ! __________________ if you can't fix it with a hammer then you have an electrical problem

02-01-2010, 10:03 PM	#3
DolSVT00 Moderator Join Date: Jan 2007 Location: Goose Creek Posts: 3,913	4" by 8"? or 4'x8'? I can probably help you if its smaller pieces but 4 foot by 8 foot your on your own lol __________________

02-01-2010, 10:25 PM	#4
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	Ive seen a few people on here looking for bulk metal. Is it that hard to come by? Ive never tried looking so dont take this as being a smartass. There is a metal fab shop just infront of my work on trident street that you may be able to hit up. There is another one on bankton circle called master sheet metal that may be able to help. Oh there is another big one across the street on the same road as bouschlons (sp) but on the opposite corner. __________________ Gap A Hoe Racing

02-01-2010, 10:55 PM	#8
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	Laurentide, Master sheet metal and american pipe inc might not find sheet metal there. Theres also a place over near dorchester called leatherwood. __________________ Gap A Hoe Racing

02-01-2010, 10:36 PM	#5
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	Can't you buy sheets of aluminum at Lowe's?

02-01-2010, 11:06 PM	#11
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	Fields ornamental and iron on cross county or may try atlantic coast steel off ladson __________________ IM BAD BOB

02-02-2010, 09:05 AM	#14
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	that is tru. i have delt with him for years and now it seems that he charges me more than give me a deal but there aint alot of places around that can get the material he can, and thats why i said to check atlantic coast __________________ IM BAD BOB

02-07-2010, 04:10 PM	#15
Chillerman Senior Member Join Date: Nov 2007 Location: Goose Creek Posts: 1,232	A & R Sheetmetal on Main Rd. Johns Island may be able to help. They can make anything and probably get anything. __________________ 88 Mustang LX mild 302, no laughing gas, and the rest is secret. Best 1/8th 7.843 @ 87.98, best 1/4 12.427 @ 111.20, best 60 1.601 89 Mustang LX wheels up @ Pinks All Out