wtb: few peices of aluminum

s14.5gonewide · 01-06-2011, 03:37 PM

i am looking for a few things mostly scrap metal peices of

tubing= 2inch thin wall
square tubing= 3/4inch think wall again

im building a peir fishing car to haul my gear

WWhittle · 01-06-2011, 05:50 PM

Well damn, I just threw away enough 3/4" to probably build 2 carts.

s14.5gonewide · 01-06-2011, 08:46 PM

wish i knew im in chas 2 times a week on deliveries i would have picked it up

see what happens when u sleep on it lol

im also looking for aluminum mesh or possibly a good stainless flat plate with holes or what not.. can be solid as well i guess... beggers cant be choosers...

if u run across any pick it up lol

toybreaker · 01-07-2011, 01:45 PM

how thin for the thin wall 2 inch? and how long or what number of what length pieces? saw cut or faced and chamfered for welding?

s14.5gonewide · 01-07-2011, 04:17 PM

for the 2 inch tubing

semi thin wall. its only for holding my rods on the side of the cart. but id like all my rod holders to be the same thickness so it looks uniform. 8/10 would be the idea i will also be making surf rod holders to stick in the sand thats why im saying 8/10 peices

with that said a 10ft stick should do me perfect.

so 1ft general size smallest id say would be 10inches
^^ as long as its not an angle cut to make the 10inches straight cut 10..

hope this helps.

i am not sure on the tubing size yet... as far as length.

s14.5gonewide · 01-08-2011, 10:34 PM

still a want if anyone has.

toybreaker · 01-09-2011, 01:33 PM

I'll check my rack at work tomorrow and get back to you.

s14.5gonewide · 01-09-2011, 07:29 PM

Quote:

Originally Posted by toybreaker

I'll check my rack at work tomorrow and get back to you.

please do.. im not against buying some just would ratherget sum scrap than buy full sticks.

im in chas Wednesday if anyone comes across any ill be in town and can come pick up.

toybreaker · 01-10-2011, 03:08 PM

No aluminum not currently slated for work.

s14.5gonewide · 01-10-2011, 03:17 PM

thx 4 checking appreciate it

toybreaker · 01-12-2011, 01:42 PM

Found a bunch of 1.5 OD .125 wall aluminum pipe..... would that work?

01-06-2011, 03:37 PM	#1
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	wtb: few peices of aluminum i am looking for a few things mostly scrap metal peices of tubing= 2inch thin wall square tubing= 3/4inch think wall again im building a peir fishing car to haul my gear __________________

01-06-2011, 08:46 PM	#3
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	wish i knew im in chas 2 times a week on deliveries i would have picked it up see what happens when u sleep on it lol im also looking for aluminum mesh or possibly a good stainless flat plate with holes or what not.. can be solid as well i guess... beggers cant be choosers... if u run across any pick it up lol __________________

01-07-2011, 01:45 PM	#4
toybreaker Senior Member Join Date: Sep 2009 Location: Piti, Guam Posts: 203	how thin for the thin wall 2 inch? and how long or what number of what length pieces? saw cut or faced and chamfered for welding? __________________ I am too good for something! I set a very bad example! Last edited by toybreaker; 01-07-2011 at 01:45 PM. Reason: edited length and finish

01-07-2011, 04:17 PM	#5
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	for the 2 inch tubing semi thin wall. its only for holding my rods on the side of the cart. but id like all my rod holders to be the same thickness so it looks uniform. 8/10 would be the idea i will also be making surf rod holders to stick in the sand thats why im saying 8/10 peices with that said a 10ft stick should do me perfect. so 1ft general size smallest id say would be 10inches ^^ as long as its not an angle cut to make the 10inches straight cut 10.. hope this helps. i am not sure on the tubing size yet... as far as length. __________________ Last edited by s14.5gonewide; 01-07-2011 at 04:20 PM.

01-08-2011, 10:34 PM	#6
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	still a want if anyone has. __________________

01-06-2011, 05:50 PM	#2
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	Well damn, I just threw away enough 3/4" to probably build 2 carts.

01-09-2011, 01:33 PM	#7
toybreaker Senior Member Join Date: Sep 2009 Location: Piti, Guam Posts: 203	I'll check my rack at work tomorrow and get back to you. __________________ I am too good for something! I set a very bad example!

01-10-2011, 03:08 PM	#9
toybreaker Senior Member Join Date: Sep 2009 Location: Piti, Guam Posts: 203	No aluminum not currently slated for work. __________________ I am too good for something! I set a very bad example!

01-10-2011, 03:17 PM	#10
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	thx 4 checking appreciate it __________________

01-12-2011, 01:42 PM	#11
toybreaker Senior Member Join Date: Sep 2009 Location: Piti, Guam Posts: 203	Found a bunch of 1.5 OD .125 wall aluminum pipe..... would that work? __________________ I am too good for something! I set a very bad example!