Ideal Garage Modified Master Cylinder

[RoadconeTuning]

Have any of you guys heard of this? apparently he's taking stock masters for camaros and modifying them to move more fluid. I called them yesterday and he said hes sold hundreds for the camaro community and only a few for gxps... he's gotten zero feedback from the gxp guys tho.

Tick doesnt offer a solution for any of the 2009+ cars due to something with the PCM having a sensor around there or something.

http://shop.idealgaragellc.com/Trans...vetrain_c7.htm

[Mustangscotty]

Nice product and very compact.

[RoadconeTuning]

I cant find anything about what hes doing to them. they look completely stock externally. i dont see how he could increase the flow without making a custom plunger or something.

[DIGGLER]

hes either increasing stroke or bore size. my guess would be bore size since it still attaches to the same point on the brake pedal. right?

[DIGGLER]

increasing bore would make for a slightly stiffer pedal, too i would think. but the difference may be very small.

[RoadconeTuning]

idk... I'm currently on JustCommodores.com.au trying to figure out what they do in australia. my main concern right now is knowing which to order, v6 camaro or v8 camaro. The guy at ID said the v6 camaro one fits the gxp but when you cross reference stock part numbers the v8 part fits a GXP.

[Matts94Z28]

Google that shit.

[RoadconeTuning]

Originally Posted by Matts94Z28

Google that shit.

lol i'm surprised my phone and work computer have a connection left after yesterday. i spent the entire afternoon scouring camaro5, grrrrr8, g8boards and ls1tech. I emailed Tick again this morning and they said they havent had the time or resources to develop anything for the cars yet.

[AverageJoe]

Maybe Tyler could look up the GM part numbers for the 3 different vehicles for you?

[schardbody]

Like digger said most likely just increased bore size which will move a higher volume of fluid but it will increase pedal effort.

[RoadconeTuning]

Originally Posted by AverageJoe

Maybe Tyler could look up the GM part numbers for the 3 different vehicles for you?

That'd be nice. when i put the V8 Camaro part number in most places it references a g8. all three show the exact same price on GMPartsDirect.com

[Matts94Z28]

Originally Posted by RoadconeTuning

lol i'm surprised my phone and work computer have a connection left after yesterday. i spent the entire afternoon scouring camaro5, grrrrr8, g8boards and ls1tech. I emailed Tick again this morning and they said they havent had the time or resources to develop anything for the cars yet.

Just have hawks copy it. lmao

[GreebeanZ28]

Lmao. Sinister line of massuh cylindaz

[RoadconeTuning]

found some cool stuff while searching... VF GTS Police car...

[BigdaddyDupree]

Its the same as a v6 camaro. The v6 car has a MV5 trans where your car has the M10 but the clutch master cyliinder is the same.

[BigdaddyDupree]

The gm part number is a 92067134 for your car and an SS camaro is a 92199594.

[RoadconeTuning]

I wonder what the difference between the SS and V6/GXP parts are. Everyone claims the part numbers are interchangeable.

[crumbie]

Originally Posted by GreebeanZ28

Lmao. Sinister line of massuh cylindaz

i just noticed...did you leave the "n" out of your screen name on purpose?

[DIGGLER]

what is the purpose of the higher volume cylinder? just wanting faster clutch action?

[RoadconeTuning]

I've got a ZR1 slave cylinder since i now have a ZR1 twindisk in the car and the stock one doesnt move enough fluid. we tried to shim the slave to see if that would work and it didnt. basically the stock one is BARELY good enough to work with a stock clutch and any more fluid or effort required means you need a new master with this car. Theres a lot of threads on the camaro boards talking about how just swapping master cylinders got rid of high rpm grinding into 2nd and third gear with the stock setup. hopefully i'll fix the issue... if not i'm lost... the only other thing i can think of is tick offers a braided stainless line between the master and slave. I'm going to call them this week and see if they think it would fit.