![]() |
|
|
#1 |
|
Senior Member
Join Date: May 2012
Location: North Charelston
Posts: 333
|
So some of you may remember this.
http://www.carolinahorsepower.com/fo...ad.php?t=16542 I think I'm going to stick with bolt ons for my car and go back to looking for an older car to work on. So I figured I'll see if anyone is interested in purchasing this. It has been taken apart and the block and crank were taken to Simmons in West Ashley. Both were cleaned and checked, the crank was polished, new cam bearings in the block and the cylinders were honed. It came out of an auto so it has the Vvt. I purchased some new flat top ls3 pistons with rings and pins to use in place of the l99's so the rods and pistons haven't been cleaned or checked. (I wasn't planning on using either) The heads are apart and need to be cleaned but are complete with rockers. It will come with everything seen in the other thread plus the heads but no oil pan or pickup tube. I have it listed on craigslist for $3,000 but I don't expect to get that. I think $2500 is fair. If anyone has an old GTO, Lemans, Tempest, Firebird or Trans Am we can maybe do some trading. |
|
|
|
|
|