Anyone in here knows how to degree in a camshaft?

Ballaholic29414 · 05-10-2010, 11:59 AM

I need to get my cam degreed in but I dont know how to do it and I dont trust myself doing it. With the lifters im using the intake wont have to be removed to remove the camshaft. Let me know ASAP. The motor is also in the car but it can be removed if needed to get it degreed in.

1998ta__1991rs · 05-10-2010, 12:02 PM

i know daryl buckner knows how, dont know about anyone else

slowgreen99 · 05-10-2010, 12:06 PM

Quote:

Originally Posted by Ballaholic29414

I need to get my cam degreed in but I dont know how to do it and I dont trust myself doing it. With the lifters im using the intake wont have to be removed to remove the camshaft. Let me know ASAP. The motor is also in the car but it can be removed if needed to get it degreed in.

it needs to be in the engine anyway. Im sure Darryl and Mitch know how. I would assume maybe Robert Holton could give a few pointers.

Pesce Nero · 05-10-2010, 12:18 PM

motor in the car can be a real PITA. sometimes there is not enough room to put a degree wheel on the crank.

do you have the cam card?

KRYPTONITE · 05-10-2010, 12:27 PM

SupermanMotorsports 224-7662

Ballaholic29414 · 05-10-2010, 01:12 PM

Quote:

Originally Posted by SIXPACKGUT

motor in the car can be a real PITA. sometimes there is not enough room to put a degree wheel on the crank.

do you have the cam card?

Yep. I have plenty space under the hood. Plus I can remove the radiator.

Pesce Nero · 05-10-2010, 01:17 PM

Quote:

Originally Posted by Ballaholic29414

Yep. I have plenty space under the hood. Plus I can remove the radiator.

removing the rad a big plus. where do you live at? cam card?

Robert Holton · 05-10-2010, 01:31 PM

You should call SupermanMotorsports i seen them boys in bowman and i used to watch them at lowcountry they riding

Ballaholic29414 · 05-10-2010, 01:57 PM

Quote:

Originally Posted by SIXPACKGUT

removing the rad a big plus. where do you live at? cam card?

Check you PM

Ballaholic29414 · 05-10-2010, 01:58 PM

Quote:

Originally Posted by JLandes

You should call SupermanMotorsports i seen them boys in bowman and i used to watch them at lowcountry they riding

I will contact them

Robert Holton · 05-10-2010, 02:25 PM

i see a truck in the parking lot with a sticker on his truck when i got to the ware house from time to time

Robert Holton · 05-10-2010, 03:12 PM

i doubt it

KRYPTONITE · 05-10-2010, 03:38 PM

Quote:

Originally Posted by 67 2 door

heard they messed up lots of motor////go somewhere else

WOW your info. is wrong, who told you that BS

05-10-2010, 11:59 AM	#1
Ballaholic29414 Senior Member Join Date: Feb 2009 Location: Charleston, SC Posts: 395	Anyone in here knows how to degree in a camshaft? I need to get my cam degreed in but I dont know how to do it and I dont trust myself doing it. With the lifters im using the intake wont have to be removed to remove the camshaft. Let me know ASAP. The motor is also in the car but it can be removed if needed to get it degreed in.

05-10-2010, 12:02 PM	#2
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	i know daryl buckner knows how, dont know about anyone else __________________ Funny

05-10-2010, 12:18 PM	#4
Pesce Nero Senior Member Join Date: Jul 2008 Posts: 2,680	motor in the car can be a real PITA. sometimes there is not enough room to put a degree wheel on the crank. do you have the cam card? __________________

05-10-2010, 12:27 PM	#5
KRYPTONITE Senior Member Join Date: Apr 2008 Posts: 3,484	SupermanMotorsports 224-7662 __________________ *The Hired HIT MAN*

05-10-2010, 01:31 PM	#8
Robert Holton Senior Member Join Date: Jul 2008 Posts: 978	You should call SupermanMotorsports i seen them boys in bowman and i used to watch them at lowcountry they riding

05-10-2010, 02:25 PM	#11
Robert Holton Senior Member Join Date: Jul 2008 Posts: 978	i see a truck in the parking lot with a sticker on his truck when i got to the ware house from time to time

05-10-2010, 03:12 PM	#12
Robert Holton Senior Member Join Date: Jul 2008 Posts: 978	i doubt it