![]() |
|
|
#1 |
|
Senior Member
|
hey guys''
i need help with the gear that would be better for the S10 i,m building' now between a 355' or a 373' gear in the 8.8 ford rearend i have found both and would a 355 work good in the 1/8 mile ? i will be running a bone stock 350 / 350 turbo when i get it together'
__________________
''THE EDMUND FLASH RIDES AGAIN ''1974 GMC Truck ( BRICK IN THE WIND ) Bracket class' i,m a little guy hiding from the BIG GUNS out there'
|
|
|
|
|
|
#2 |
|
Senior Member
|
any street driving? you could also find the 8.8 with 4.10's also
__________________
|
|
|
|
|
|
#3 |
|
Senior Member
|
any street driving? you could also find the 8.8 with 4.10's also. what size tire are you going with? any power adders? if it was me, i would go 3.73 minimum. but i prefer 4.10 and depending on what rpm you want to trap at maybe higher than that
__________________
|
|
|
|
|
|
#4 |
|
Senior Member
Join Date: Mar 2008
Location: SUMMERVILLE
Posts: 3,681
|
depending on the tire size the 3.73 would be the better for you. normally the less amount of power you have you normally want a taller gear to help make up for it. 4.10 may be even better. with my th350 and 8.8 on the baby 302 motor it had a 4.56 and drove the street pretty good, but may be a little to big for you
__________________
IM BAD BOB |
|
|
|
|
|
#5 |
|
Senior Member
|
well guys' this will a race truck only''
and the tires i have are 28-10-15 goodyears slicks now i can get the 355 rear cheaper that the 373 rear' would a 355 do ok in the 1/8 mile'' or go with the 373 and spend more money'
__________________
''THE EDMUND FLASH RIDES AGAIN ''1974 GMC Truck ( BRICK IN THE WIND ) Bracket class' i,m a little guy hiding from the BIG GUNS out there'
|
|
|
|
|
|
#6 |
|
Senior Member
Join Date: May 2007
Posts: 2,014
|
How fast do you think it will be? That 3.73 with that tire is good to over 150mph at 7000rpm.
|
|
|
|
|
|
#7 |
|
Senior Member
Join Date: Aug 2009
Posts: 3,774
|
4.10 with that much tire.
|
|
|
|
|
|
#8 |
|
Senior Member
Join Date: Mar 2008
Location: SUMMERVILLE
Posts: 3,681
|
i got some 3.73, 4.10, and 4.56 if you want to change them
__________________
IM BAD BOB |
|
|
|
|
|
#9 |
|
Senior Member
Join Date: Apr 2008
Location: Mt. Pleasant, SC
Posts: 3,899
|
I have 4.11's with a powerglide and I make a decent amount of power.
|
|
|
|
|
|
#10 |
|
Senior Member
Join Date: Jun 2008
Location: West Ash
Posts: 4,283
|
im putting 3.25's with a th400 in mine on 28" tires
__________________
![]() Funny |
|
|
|
|
|
#11 |
|
Neo is Jesus
Join Date: Jan 2007
Posts: 13,265
|
I have direct drive on 37's
|
|
|
|
|
|
#12 |
|
Senior Member
Join Date: Jul 2008
Location: MACEDONIA
Posts: 4,967
|
I have a th350 4.11s and 28s and im faster than matt
__________________
|
|
|
|
|
|
#13 |
|
Senior Member
Join Date: Apr 2008
Location: Mt. Pleasant, SC
Posts: 3,899
|
You arent going to have a ton of power so you need all the gear you can get. For an 8.8 I would get 4:10-4:30' s.
|
|
|
|
|
|
#14 |
|
Senior Member
|
thanks for the input guys''
i,ll add more to the truck as the money lets me'' hope to have it ready for the 2011 season'
__________________
''THE EDMUND FLASH RIDES AGAIN ''1974 GMC Truck ( BRICK IN THE WIND ) Bracket class' i,m a little guy hiding from the BIG GUNS out there'
|
|
|
|
![]() |
|
|