metal polishing

Ka-Chow · 05-20-2007, 07:40 PM

start off with some 120 grit sand paper and work your way up to about 380 or 400 or so. Once done start polishing, after you polish it a couple of times take that 400 grit and sand it again or go to a higher grit. then polish it out and you should be blingin. I am leaving tuesday ut I am free all day tomorrow if you get the paper and polish Iwill come over and show you how to do it. we polish metal on our bots all the time and it works great.

05-20-2007, 07:40 PM	#10
Ka-Chow Senior Member Join Date: Jan 2007 Location: Summerville Posts: 712	start off with some 120 grit sand paper and work your way up to about 380 or 400 or so. Once done start polishing, after you polish it a couple of times take that 400 grit and sand it again or go to a higher grit. then polish it out and you should be blingin. I am leaving tuesday ut I am free all day tomorrow if you get the paper and polish Iwill come over and show you how to do it. we polish metal on our bots all the time and it works great. __________________